ViewSonic PJ400-2 OEM Philips Projector Lamp 165W 2000 Hrs
Replacement projector lamp module with 165 W Philips UHB bulb and housing, rated for 2,000 hours
- Power rating165 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Ready-to-install module with pre-assembled housing
- 165W Philips UHB bulb delivers rated brightness
- 2000-hour lamp life supports extended use
- OEM-sourced from Philips for guaranteed compatibility
- ISO9001 manufacturing ensures consistent quality control
Direct replacement lamp
This ViewSonic PJ400-2 lamp module contains a new Philips UHB 165W bulb pre-installed in its housing. It arrives fully assembled so you can swap it into a compatible ViewSonic projector without extra tools or alignment steps.
Projector owners needing a new bulb
It suits anyone whose ViewSonic projector uses the PJ400-2 lamp and who wants a ready-to-fit module with a 2000-hour rated life. Buyers who need a bare bulb only, a different wattage, or a lamp for another projector model should look elsewhere.
165W Philips UHB bulb
The lamp delivers 165 watts from a Philips UHB bulb rated for 2000 hours of operation. That wattage and lamp type determine brightness and runtime, so verify your projector specifies the same values before ordering.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $114.99
- Pricier than about 64% of the 9,513 comparable items (median $99.99).
- Power rating 165 W
- Lower than about 88% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | ViewSonic |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 165 W |
Questions about this item
Which ViewSonic projectors accept the PJ400-2 lamp module?
The PJ400-2 lamp module is designed as a direct replacement for ViewSonic projectors that originally shipped with the DT00701 lamp assembly.
What is the correct installation sequence for the PJ400-2 housing?
Power off the projector, allow it to cool completely, remove the old lamp housing, insert the new PJ400-2 module until it seats firmly, then reset the lamp timer in the menu.
When should the 165 W UHB bulb inside the PJ400-2 be replaced?
The lamp is rated for 2,000 hours of typical use; replace it when brightness drops noticeably or the projector displays a lamp-end-of-life warning.
More in Replacement Projector Bulbs
Similar items
Toshiba TDP-T30U projector lamp 180W 2000-3000 hrs
- 180 W
- 2,000 (Normal) - 3,…
3M Dukane I-Pro 8974WU DT01281 Projector Lamp 245W
- 245 W
- 2,500 (Normal) - 4,…
Acer America PD113 Projector Lamp 200W
- 200 W
- 2,000 (Normal) - 4,…





