ViewSonic PJL9520 Projector Lamp 200W Ushio NSHA
A 200W Ushio NSHA replacement lamp module rated for 2,000 normal or 3,000 economy hours
- Power rating200 W
- Lamp lifespan2,000 (Normal) - 3,000 (Economy) Hrs.
- Product typeProjector Lamp
- Ready-to-install module saves setup time
- 200W Ushio NSHA bulb delivers specified brightness
- 2,000 normal hours extends replacement interval
- 3,000 economy hours lowers operating cost
- ISO 9001 manufacturing ensures consistent quality
Replacement lamp module
The ViewSonic PJL9520 is a ready-to-install 200W projector lamp module that combines a Ushio NSHA bulb with its housing. It fits ViewSonic projectors requiring the RLC-044 part number and is intended for users who need a direct OEM-standard replacement without separate bulb handling.
Thermal output and power draw
The lamp runs at 200 watts and delivers a rated life of 2,000 hours in normal mode or 3,000 hours in economy mode. Economy mode reduces brightness and heat output, which also lowers fan noise during typical presentations or classroom use.
Pre-assembled housing benefit
Because the bulb ships already seated in its housing, installation requires only a single module swap rather than a bare-bulb change. Each unit is tested to ISO 9001 criteria for ignition, voltage, beam performance and run-time, so the projector recognises it immediately and operates without alignment steps.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $112.99
- Pricier than about 62% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Brand name | ViewSonic |
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 (Normal) - 3,000 (Economy) Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
How do I install the PJL9520 lamp module, and what step do people often miss?
The lamp ships as a fully assembled bulb and housing; power off the projector, let it cool, remove the old module, insert the new one until it clicks, then reset the lamp timer in the menu — skipping the timer reset is the common mistake.
What maintenance or replacement will the Ushio NSHA 200W bulb need later?
The bulb is rated for 2000 hours in normal mode or 3000 hours in economy mode; after that the lamp module must be replaced, and the air filter should be cleaned regularly to maintain airflow.
What limit appears first during sustained use of this 200W lamp?
The rated lamp life of 2000 hours normal or 3000 hours economy is the first limit; brightness will gradually decline until the projector indicates replacement is required.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. CP-WX645 (DT00871) Projector Lamp 275W UHB
- 275 W
- 2,000 (Normal) - 3,…





