We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass angle stop valve with compression fittings

Vintage

Vintage CC33102TL 3/8" IPS x 3/8" OD Comp Angle Stop

SKU CH-732G-23GHD

Angle stop connects 3/8 inch IPS to 3/8 inch OD compression for supply line shut-off

  • Product typeTools
  • 3/8" IPS inlet fits standard supply lines
  • 3/8" OD compression outlet connects directly to fixture tubing
  • Angle stop design allows local shut-off without draining the system
  • New Vintage CC33102TL construction for reliable quarter-turn operation
  • California Proposition 65 warning discloses regulated chemical content

Angle Stop Valve For Bathroom Supply Lines

The Vintage CC33102TL angle stop controls water flow to a fixture using a 3/8 inch IPS inlet and a 3/8 inch OD compression outlet. It is a new bath faucet part intended for residential plumbing installations. The quarter-turn handle provides simple on and off operation.

Suitable For Standard Fixture Connections

This valve suits installers replacing an existing angle stop with the same inlet and outlet sizes. It is not for systems requiring a different thread type, a sweat connection or a push-fit end. Buyers who need a straight stop or a dual-outlet valve should look at another product.

3/8 Inch IPS By 3/8 Inch OD Compression Ends

The defining specification is the combined inlet and outlet sizing of 3/8 inch IPS by 3/8 inch OD compression. Match these exact dimensions to the supply line and fixture tailpiece before purchase. The product carries a California Proposition 65 warning for chemical exposure.

How it compares

Measured against everything we stock in Faucet Valves & Replacement Parts, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 74% of the 1,132 comparable items (median $54.99).

Specifications

Product
Brand nameVINTAGE
Product typeTools

Questions about this item

How do I install the 3/8" IPS inlet on the CC33102TL angle stop, and what step do people often miss?

Thread the 3/8" IPS inlet onto the supply pipe using pipe-thread sealant, then tighten the 3/8" OD compression nut onto the riser; the step often missed is applying sealant to the IPS threads before tightening.

What maintenance or replacement will the CC33102TL angle stop need over time?

The compression ferrule and rubber washer inside the 3/8" OD nut can harden or deform, so replace them if a drip appears at the riser connection; the brass body itself rarely needs replacement.

What limit appears first on the CC33102TL under sustained household water pressure?

The 3/8" OD compression joint is the first limit; if pressure spikes repeatedly the ferrule can cold-work and leak before the IPS threads or brass body show any stress.

More in Faucet Valves & Replacement Parts

Similar items