Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
500W continuous ATX 12V 2.31 and EPS 12V 2.92 server PSU with 120mm PWM fan, dual 6+2 pin PCIe, active PFC and 80% typical efficiency
This VINTMAR unit delivers 500 watts of continuous power at 40 degrees Celsius with a 600 watt peak rating. It meets ATX 12V 2.31 and EPS 12V 2.92 specifications for modern motherboard compatibility. The supply includes 20+4 pin main, dual 6+2 pin PCIe and 4+4 pin CPU connectors. Builders needing more than two graphics-card plugs or higher continuous wattage should look elsewhere.
A 120 mm PWM fan with hydraulic bearing and eddy-current blades adjusts speed based on internal temperature. High-density honeycomb vents increase airflow through the chassis for efficient heat removal. Active power factor correction operates across a 140 to 300 volt input range. Typical load efficiency is rated at 80 percent.
Two 6+2 pin cables provide up to 300 watts of combined auxiliary power for discrete graphics cards. Cable lengths reach 550 millimetres with an extra 150 millimetre branch for flexible routing. Systems requiring three or more PCIe power leads cannot use this supply.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
Route the 550 mm 20+4Pin cable to the motherboard socket and the two 6+2Pin cables to the graphics card, then press each connector until the latch clicks; the step often missed is seating the 4+4Pin CPU plug on the 650 mm lead.
Clean dust from the 120 mm PWM fan and honeycomb vents every few months; the hydraulic bearing fan is not user-serviceable, so replace the entire supply if noise or temperature rises.
The supply delivers 500 W continuously at 40 °C; exceeding that level triggers over-current protection, so the 600 W peak is only available for brief transients.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?