VIVO STAND-V001TW White Single Monitor Desk Mount Extra Tall 31" Pole

Extra Tall Pole for Sit-Stand Use

The 31-inch center pole lets you raise the monitor high enough for standing work or lower it for seated tasks. Height adjustment slides along the pole without steps, so you can set the exact eye level you need. The white steel construction resists scratches and supports screens up to 22 lbs. It fits displays from 13 to 32 inches and ultrawide models up to 38 inches if they stay under the weight limit.

VESA and Desk Thickness Limits

The mount accepts only 75x75 mm or 100x100 mm VESA patterns, so monitors with proprietary hole spacing cannot attach. Maximum desktop thickness is 3.25 inches for the C-clamp and 3 inches for the grommet option; thicker surfaces will not clamp securely. The arm extends 15.5 inches from the pole, which may not reach across very deep desks. Tilt range is +45 to -45 degrees, swivel 180 degrees, and rotation 360 degrees.

Simple Two-Step Installation

Bolt the VESA plate to the monitor, then fasten the C-clamp or grommet base to the desk and slide the arm onto the pole. Most problems come from forgetting to tighten each joint after positioning, which lets the screen drift over time. Cable clips on the arm and pole snap off if pulled too hard, so route cables with slack. Heavier ultrawide screens may need periodic re-tightening of the tilt tension.