We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VIVOTEK Inc.

VIVOTEK Inc. AW-GEL-205A-260 16-Port Gigabit PoE++ Managed Network Switch

SKU CH-Z2BF-KKGKC MPN AW-GEL-205A-260

A 16-port Gigabit managed PoE++ switch with four 90W ports, twelve 30W ports, two RJ45 and two SFP uplinks, and a 260W power budget

  • Type of switchLite Managed PoE Switch
  • Product formatRackmount
  • Supported standards802.3 af/at/bt
  • Management typeManaged
  • Uplink ports2 x RJ45 + 2 x SFP
  • Uplink portsSFP & RJ45

Model AW-GEL-205A-260

  • Power 90 W devices on four ports with PoE++ 90W support
  • Connect 12 additional cameras or APs using 30 W PoE+ ports
  • Uplink via two copper and two fibre ports for flexible backbone links
  • Manage traffic with 4096 VLANs and port mirroring on a Layer 2 switch
  • Operate in harsh sites from -10 °C to 50 °C with 260 W total PoE budget

16-Port Gigabit PoE++ Managed Switch

The VIVOTEK AW-GEL-205A-260 is a rackmount Lite Managed switch with sixteen Gigabit Ethernet PoE ports. Ports 1 to 4 deliver up to 90W each under the 802.3bt standard, while ports 5 to 16 provide 30W each under 802.3at. A total PoE budget of 260W powers connected devices such as cameras or access points. Two RJ45 and two SFP uplink ports operate at 10/100/1000 Mbps.

Installers needing high-power PoE on select ports

This switch suits deployments where a few devices require up to 90W and the majority need standard PoE+ power. The 260W budget limits how many high-power ports can run simultaneously, so sites needing full 90W on every port should look elsewhere. Builders requiring Layer 3 routing or PoE budgets above 260W must choose a different model.

260W total PoE power budget

The 260W ceiling is the single figure that determines whether this unit fits the installation. Four ports at 90W would exceed the budget, so the number of high-power devices must be calculated against the cap. Port mirroring, 4096 VLAN IDs, 9216-byte jumbo frames and an 8K MAC table support managed network segmentation.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $307.99
Cheaper than about 59% of the 2,759 comparable items (median $482.99).

Specifications

Product
Brand nameVivotek
Model nameAW-GEL-205A-260
Memory
Buffer size4.1Mb
Connectivity
Supported standards802.3 af/at/bt
Management typeManaged
Uplink connection10/100/1000 Mbit/s
Main port speed10/100/1000 Mbit/s
MAC table size8K
VLAN capability4096 VLAN IDs
Jumbo frame support9216 bytes
Layer support2
Port mirroring supportYes
Ports & slots
Uplink ports2 x RJ45 + 2 x SFP
Main ports16 x GbE PoE
PoE-enabled ports16
Power
Power over EthernetPort 1-4 bt 90 W
Port 5-16 at 30 W
Total PoE power260 W
Power details100 to 240VAC, 50/60 Hz
Max power draw270 W
Size & build
Product dimensions1.73 in × 17.32 in × 8.27 in
Product weight5.89 lb (2.67 kg)
Shipping weight3.00 kg
Package size500 × 260 × 100 mm
In the box
In the boxPower Cord, QIG, Rack Mount Kit
Environment & compliance
ComplianceCE, FCC, UKCA, LVD, VCCI, BSMI
Temperature rangeOperating Temperature: -10 °C to 50 °C (14 °F to 122 °F)
Storage Temperature: -20 °C to 70 °C (-4 °F to 158 °F)
Humidity range10 to 90% RH
More details
Type of switchLite Managed PoE Switch
Product formatRackmount

Other versions of this model

3 more in the same range

Questions about this item

Will the 16 PoE ports power my existing 802.3af cameras and 802.3at access points without configuration?

Ports 1 to 4 deliver up to 90W under 802.3bt and ports 5 to 16 supply up to 30W under 802.3at; both ranges are backward-compatible with 802.3af devices, so legacy cameras and access points will negotiate power automatically.

How can I verify the 260W PoE budget is not being exceeded once the switch is live?

The managed interface reports real-time per-port consumption and total draw; if the sum approaches 260W the switch will log an event and can disable the lowest-priority ports to stay within budget.

Does the package include SFP transceivers for the two uplink slots or must they be purchased separately?

The box contains a power cord, quick installation guide and rack-mount kit only; SFP modules for the two Gigabit SFP uplinks are not included and must be sourced separately.

More in Ethernet & PoE Switches

Similar items