Vszerda 8K DP 1.4 Fiber Optic Cable 10m displayport cable
10 m fibre-optic DisplayPort 1.4 cable delivers 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HDR10 and HDCP 2.2
Cable Length 33 Feet
- 8K 7680×4320 at 60 Hz for ultra-sharp detail
- 4K at 144 Hz and 2K at 240 Hz for smooth gaming
- 4 Gbps HBR3 bandwidth with DSC 1.2 for full resolution headroom
- 24 K gold-plated connectors resist corrosion and secure the signal
- Fibre construction eliminates interference over 10 m runs
8K DisplayPort 1.4 Fiber Cable 10m
This fiber optic cable carries DisplayPort 1.4 signals over ten metres. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HBR3 bandwidth of 32.4 Gbps and DSC 1.2 compression. Gold-plated connectors and oxygen-free copper wiring ensure a stable, flicker-free link for gaming or professional displays.
Suits long-run 8K and high-refresh setups
Builders routing a signal across a room to an 8K monitor or a VR headset will benefit from the fiber design. Users needing only a short copper cable, or those without DisplayPort 1.4 sources, should consider a standard passive cable instead.
10 metre fiber reach decides fit
The ten metre length is the critical specification; it enables installations where copper cables would lose signal integrity. Verify that your source and display both have full-size DisplayPort sockets before purchasing.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $49.99
- Pricier than about 81% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Questions about this item
How do I install the 10m fiber DisplayPort 1.4 cable so the directional connectors are correct?
Plug the end marked "Source" into the GPU or laptop DisplayPort output and the end marked "Display" into the monitor input; reversing them will give no signal because the optical engine only works one way.
What maintenance or replacement will the 24K gold-plated connectors need over time?
The gold plating resists oxidation, so no scheduled maintenance is required; only replace the cable if physical damage breaks the fiber core or a connector is bent.
What is the first limit I hit when running 8K at 60Hz continuously on this 32.4Gbps cable?
The 32.4Gbps HBR3 bandwidth ceiling is reached at 8K 60Hz with full colour depth, so higher refresh rates or bit depths would require Display Stream Compression 1.2.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
Tripp Lite P582-020 DisplayPort to HDMI cable 20 ft 1080p
- 20 ft (6.1 m)
- DisplayPort to HDMI
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A022 DisplayPort 1.4 fiber optic cable 50 ft
- 50 ft (15.2 m)
- DisplayPort
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
LUOM TJ-A013 8K DP1.4 Fiber displayport cable 33FT
- 1 x DisplayPort 1.4
- 1 x DisplayPort 1.4










