Vszerda DisplayPort 1.4 cable 3.3 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz black
A 3.3 ft DisplayPort 1.4 cable rated for 32.4 Gbps bandwidth, supporting 8K at 60 Hz and 4K at 144 Hz with HDR10 and DSC 1.2 compression
Cable Length 3.3 Feet
- 8K 60 Hz clarity for immersive viewing
- 4K 144 Hz smoothness for competitive gaming
- 4 Gbps bandwidth handles uncompressed high-res signals
- Triple-shielded 28 AWG tinned copper resists interference
- Nylon-braided jacket rated for 30000+ bends
DisplayPort 1.4 cable 3.3 ft 32.4 Gbps
This Vszerda cable carries DisplayPort 1.4 signals at 32.4 Gbps over a 3.3 ft length. It supports 8K at 60 Hz, 4K at 144 Hz and 2K at 240 Hz with HBR3, DSC 1.2 and HDR10. The 28 AWG tinned copper conductors and triple-layer shielding deliver stable video and audio. Gold-plated connectors and a nylon braid rated for 30000 bends complete the build.
Gamers and creators driving 8K 60 Hz or 4K 144 Hz
The bandwidth and refresh-rate limits suit high-refresh 4K gaming monitors and 8K productivity displays. It is not for buyers who need 8K above 60 Hz. It is not for setups that require longer runs than 3.3 ft. It is not for source or sink devices that only offer HDMI ports.
32.4 Gbps HBR3 bandwidth
This single figure decides whether the cable can transport your target resolution and refresh rate without compression artefacts. If your display and graphics card both run DisplayPort 1.4 HBR3, the 32.4 Gbps link handles 8K 60 Hz, 4K 144 Hz and 2K 240 Hz. If either end is limited to HBR2, the maximum throughput drops accordingly.
How it compares
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 90% of the 3,804 comparable items (median $15.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda DisplayPort 1.4 cable 10 ft 8K 60 Hz 4K 144 Hz 32.4 Gbps HDR10 DSC 1.2 black
Questions about this item
Will this 3.3 ft DisplayPort 1.4 cable work with my older monitor that only has DP 1.2?
Yes, the cable is backward compatible with DisplayPort 1.3 and 1.2, so it will carry video and audio to a DP 1.2 display at the monitor's maximum supported resolution and refresh rate.
How can I verify the cable is delivering 4K at 144 Hz after I plug it in?
Open your GPU control panel or the monitor on-screen display and confirm the active signal shows 3840x2160 at 144 Hz with HDR enabled if your display supports it.
Does the box include any adapters or do I need to buy a separate DisplayPort to HDMI converter?
The cable has DisplayPort connectors on both ends; no adapters are included. If your display only has HDMI, you will need a separate active DisplayPort to HDMI adapter.
More in DisplayPort Monitor Cables
Similar items
Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
Jansicotek TJ-A033 DisplayPort cable 1.4 6.6 ft 8K 60Hz 4K 144Hz
- 6.6 ft (2.01 m)
- DisplayPort Cable
STARTECH DP2HDMM1MB DisplayPort to HDMI cable 3 ft 4K
- 3 ft (0.91 m)
- DisplayPort to HDMI
ESTONE TJ-A033 DisplayPort 1.4 cable 3.3 ft black
- 3.3 ft (1.01 m)
- DisplayPort Cable
Nippon Labs DP-HDMI-6 6 ft displayport cable DP 1.2 to HDMI 4K 30Hz
- 6 ft (1.83 m)
- DisplayPort to HDMI
ESTONE DisplayPort 1.4 extension cable 6.6 ft 8K@60Hz HBR3 32.4 Gbps
- 6.6 ft (2.01 m)
- DisplayPort Cable










