Vszerda GB1207PTV3-A 12V 1.02W 70×70×25mm 3-pin case fan
A 70 × 70 × 25 mm 12 V case fan with fluid bearing rated for 50 000 hours and a three-pin speed-signal connector
- 12 V operation for direct PSU compatibility
- 70 × 70 × 25 mm footprint fits tight chassis
- 02 W draw keeps power budget low
- Fluid bearing rated for 50000 hrs service life
- 3-pin connector provides tachometer feedback
70 × 70 × 25 mm 12 V case blower
This 70 mm square blower draws 1.02 W at 12 V and uses a fluid bearing rated for 50 000 hours. It is intended for computer-case airflow or projector cooling where a compact turbofan form factor is required.
Three-pin plug with speed signal
The fan connects through a standard three-pin header that supplies power, ground and an FG speed-measuring line. Installation is straightforward: align the plug, press it onto the motherboard or controller header, and secure the fan with four 70 mm mounting screws. The only common issue is reversed insertion, which leaves the speed signal unread.
Verify 12 V header and 70 mm mounting pattern
Before ordering, confirm that your board or fan controller provides a 12 V three-pin header and that the chassis or device offers a 70 × 70 mm screw pattern with 25 mm depth clearance. The blower orientation is fixed, so ensure the exhaust direction suits your airflow plan.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 76% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the 70×70×25 mm fan is spinning correctly after connecting the 3-pin header?
The third wire carries an FG speed signal; monitor RPM in BIOS or fan-control software to verify the 12 V, 1.02 W blower reaches its rated speed.
What accessories are included with the 7025 turbofan?
The unit ships with the fan and its attached 3-pin plug; mounting screws and any duct adapters are not included.
Which voltage variant suits a standard 12 V case-fan header?
This model is the 12 V version rated at 1.02 W, designed for direct connection to a 12 V 3-pin motherboard or controller header.
More in PC Cooling Fans
Similar items
be quiet! BL118 Silent Wings Pro 4 120mm PWM White case fan
- 120 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Fractal Design FD-F-AS1-1207 Aspect 12 RGB 120 mm 3-pack case fan
- 3 Fans
- No Controller





