Vszerda MCIO 8X 74P to 2X 36P Mini SAS HD SFF-8643 SAS cable 1m
Connects a PCI-E 5.0 MCIO 8X 74P port to two Mini SAS HD SFF-8643 36P connectors for high-speed server storage
- Connector detailsMcio
- Connector genderMale-to-Male
- Cable shieldingHigh Speed
- Product typeMCIO
- Product colorBlack
- DetailsMCIO
- PCI-E 5.0 compliant for ultra-fast server data transfer
- MCIO 8X 74P to dual 36P Mini SAS HD SFF-8643 connectivity
- OFC copper with aluminum Mylar shielding ensures signal integrity
- Locking connectors prevent accidental disconnection in operation
- Flexible 1m design simplifies routing in dense chassis
Server Connectivity
This Vszerda cable bridges a PCI-E 5.0 MCIO 8X 74P port to two 36P Mini SAS HD SFF-8643 connectors. It suits administrators wiring high-density storage or accelerator cards inside 1U or 2U chassis where native MCIO sockets are present.
Sustained Signal Quality
OFC copper conductors and aluminum Mylar shielding preserve signal integrity across the 1m run during continuous PCI-E 5.0 traffic. Locking latches on both ends resist vibration-induced unseating in rack environments.
Pre-Install Checklist
Verify the host board exposes an MCIO 8X 74P header and that the target backplane or HBA accepts SFF-8643 plugs. Confirm the 1m reach fits your cable-routing path without sharp bends. Ensure airflow clearance around the split assembly.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $41.99
- Pricier than about 88% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-2 × 43 |
| Product type | MCIO |
| Product color | Black |
| Ports & slots | |
| Connector details | Mcio |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
Questions about this item
Does the MCIO 8X 74P cable add noise, heat or power draw when installed in a server running continuously?
The cable is a passive assembly with OFC copper wiring and aluminum Mylar shielding, so it draws no power and generates no audible noise or measurable heat of its own.
What ports must my hardware already provide for the MCIO 8X 74P to 2X 36P Mini SAS HD SFF-8643 cable to work?
One MCIO 8X 74-pin receptacle and two SFF-8643 Mini SAS HD 36-pin receptacles are required on the host and target devices.
Will the 1 m MCIO 8X 74P cable work with older SAS controllers that only have SFF-8643 ports?
Yes, the cable splits one MCIO 8X 74P link into two SFF-8643 36P connectors, so it can connect a newer MCIO host to legacy SAS drives or backplanes.
More in SAS, SCSI, InfiniBand & MCIO Cables





