Vszerda MCIOSFF8654-4XST-L SFF-8654 38P to 4X SATA Left Angle Cable 100CM
Connects a 38-pin SFF-8654 port to four left-angle SATA drives at up to 24 Gbps over a 100 cm flat cable
- Connector detailsMcio
- Connector genderMale-to-Female
- Cable shieldingHigh-speed transfer, left-angle SATA connectors, durable con
- Product typeSAS
- Overall length18
- DetailsSAS
- 24Gbps throughput via SFF-8654 SAS 4.0 interface
- Four SATA 3.0 6Gbps ports from single 38-pin connector
- Left-angle SATA plugs fit tight server chassis
- Flat cable design eases routing and cuts EMI
- Hot-plug support allows drive swaps without downtime
SFF-8654 38-pin to four SATA breakout cable
This 100 cm cable converts a single SFF-8654 38-pin port into four left-angle SATA 7-pin connectors. It supports SAS 4.0 at up to 24 Gbps on the host side and SATA 3.0 at 6 Gbps per drive. The flat, miniaturised design simplifies routing in dense server chassis.
Server builders adding SATA storage to an MCIO port
Ideal for data-centre, cloud and enterprise servers that need hot-plug SATA drives without shutting down. Not suited for installers who require right-angle or straight SATA ends, or who need additional SAS ports beyond the four SATA links provided.
24 Gbps SAS 4.0 host interface
The SFF-8654 38-pin connector delivers up to 24 Gbps aggregate bandwidth, dividing into four independent 6 Gbps SATA channels. This single specification determines whether the cable matches your controller and drive performance requirements.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $31.99
- Pricier than about 70% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ST-JY |
| Model name | MCIOSFF8654-4XST-L |
| Product type | SAS |
| Ports & slots | |
| Connector details | Mcio |
| Connector gender | Male-to-Female |
| Size & build | |
| Cable shielding | High-speed transfer, left-angle SATA connectors, durable construction |
Questions about this item
What does the 24Gbps SAS4.0 rating mean when the cable splits to four SATA drives?
The SFF-8654 38-pin end carries up to 24Gbps aggregate bandwidth, but each of the four SATA 7-pin connectors is limited to the SATA3.0 6Gbps ceiling, so the total throughput cannot exceed 24Gbps combined.
How does the SFF-8654 interface cap real-world speed with SATA drives attached?
The cable is built to the SAS4.0 24Gbps spec on the 38-pin side, yet every SATA port tops out at 6Gbps, making the SATA link the practical bottleneck for each drive.
What clearance does the left-angle SATA end need to fit in a tight server chassis?
The left-angle SATA connectors sit flat against the drive, and the 100cm flat cable routes easily in confined spaces, requiring only enough room for the 38-pin MCIO plug on the motherboard side.
More in SAS, SCSI, InfiniBand & MCIO Cables





