Vszerda Mini SAS 36pin SFF-8087 to 90° 4×SATA 1.64ft
Connects a controller with an SFF-8087 port to four SATA drives at 6Gbps per port over a 1.64-foot cable with 90-degree connectors
- 6 Gb/s per port for fast drive throughput
- 90° angled SATA connectors ease tight backplane routing
- 64 ft length with woven mesh sleeve simplifies cable management
- P1–P4 markers give quick port identification after install
- Tinned copper 30 AWG drain wire maintains signal integrity
Mini SAS SFF-8087 to 90° SATA breakout
This cable connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives. It suits builders adding direct-attached storage to a server or workstation chassis. The forward breakout design links the host controller to target backplanes or drive cages. Each of the four ports supports up to 6Gbps data transfer.
Right-angle SATA connectors ease tight routing
The 90-degree SATA plugs reduce strain in shallow drive bays or crowded backplanes. Latch locking on both the Mini SAS and SATA ends secures connections against vibration. Woven mesh sleeving covers half the 1.64ft length for protection while keeping the cable flexible. P1 to P4 markers identify each drive lane after installation.
Sustained 6Gbps per lane across four drives
The cable carries 6Gbps per port continuously when paired with a compatible host bus adapter. Four lanes share bandwidth across two PCIe 2.0 x8 links for balanced throughput. Tinned copper drain wire at 30 AWG maintains signal integrity over the full run. Blue jacket with black sleeving aids visual tracing in dense enclosures.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 58% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the 6Gbps per port link is active after connecting the SFF-8087 to my controller?
Check the RAID or HBA BIOS during POST; each of the four SATA targets should negotiate at 6Gbps and appear as healthy members of the array.
What comes with the cable and what must I source separately?
The package includes the blue 1.64ft SFF-8087 male to four 90° SATA female breakout with woven mesh sleeve and P1-P4 markers; you must supply a compatible controller with an SFF-8087 port and the SATA drives.
Which length should I choose for a standard chassis?
This model is offered in a single 1.64ft length; select it when the controller-to-backplane distance fits within that reach.
More in SAS, SCSI, InfiniBand & MCIO Cables





