Vszerda Mini SAS HD Cable SFF-8644 to SFF-8643 12Gbps 28AWG 1m
Connects SFF-8644 to SFF-8643 at 12Gbps using 28AWG copper for server and storage links
- Supports 12Gbps single-channel transmission for high-bandwidth server links
- 28AWG oxygen-free copper wire reduces signal loss across the run
- 100% open and short tested with 300V withstand for reliable operation
- Connects SFF-8644 to SFF-8643 interfaces in RAID and storage arrays
- 1 metre length suits typical rack and enclosure cable routing
Vszerda Mini SAS HD Cable 12Gbps
This Vszerda Mini SAS HD cable connects SFF-8644 and SFF-8643 interfaces at up to 12Gbps per channel. It uses 28AWG oxygen-free copper wire to maintain signal integrity over one metre. The assembly is fully open and short tested for reliable server and storage links.
Suits RAID cards and storage arrays
System builders linking SAS controllers to backplanes or enclosures will find the correct pin-out and bandwidth here. Buyers who need a different length such as half a metre or three metres should select another option from the range. Anyone requiring an SFF-8644 to SFF-8644 or SFF-8643 to SFF-8643 connection must choose a different cable.
12Gbps single-channel rating decides fit
The 12Gbps single-channel specification determines whether this cable matches your controller and drive speeds. Each end is 100% tested to withstand 300V DC for 0.01s with insulation resistance of 10M and conductive resistance of 2. Verify that your hardware specifies 12Gbps SAS before purchasing.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Cheaper than about 55% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the SFF-8644 end connect to my existing SFF-8643 RAID card without an adapter?
No — the cable has an SFF-8644 connector on one side and an SFF-8643 connector on the other, so it links those two interfaces directly.
How can I verify the 12Gbps link is active after I plug it in?
Check the RAID controller or HBA firmware dashboard; it will report a negotiated 12Gbps link speed when the cable is seated correctly.
Does the 1m length come with any extra brackets or screws?
Only the cable itself is included — no brackets, screws or additional hardware are supplied.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
CableDeconn H0305 SAS cable SFF-8087 36P to dual SFF-8088 26P PCI bracket
- HDMI Cables
- Black & Clear
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
EN-Labs Oculink SFF-8611 to U.2 U.3 SFF-8639 SAS Cable 1.64ft Black
- SAS
- Black





