Vszerda Mini SAS SFF-8643 to 4 SFF-8482 29Pin 6Gbps Cable 0.5M
Connects one SFF-8643 host port to four 29-pin SFF-8482 drives at 6 Gbps over a 0.5 m cable
- Rated speed6 Gbit/s
- Connector count116
- Connector detailsSff-8643
- Connector genderMale
- Cable shielding1-to-4
- Product typeMini-SAS
- Connect four drives with one 50 cm cable
- 6 Gbps bandwidth meets SAS 2.1 standard
- SFF-8643 host links to four SFF-8482 targets
- Supports both SAS and SATA hard disks
- Not compatible with PCI-E SFF-8643 controllers
Server storage cable
This 0.5 metre cable links a single Mini SAS HD SFF-8643 host port to four SAS 29-pin SFF-8482 drive connectors. It lets administrators attach up to four SAS or SATA disks to a compatible RAID or HBA controller in dense server chassis.
Sustained 6 Gbps throughput
The assembly follows the SAS 2.1 specification and maintains 6 gigabits per second across each of the four lanes during continuous read or write workloads. Shielded 1-to-4 construction preserves signal integrity over the full length without the errors seen in cheaper unshielded looms.
Passive thermal profile
As a copper cable it draws no power and adds no acoustic noise to the rack. The low-profile connectors fit tight backplane spacing while the 50 centimetre reach keeps cable management tidy in 1U and 2U enclosures.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Cheaper than about 70% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Chenyang |
| Product type | Mini-SAS |
| Product color | SFF-8643–4 SFF-8482 Cable |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 116 |
| Connector details | Sff-8643 |
| Connector gender | Male |
| Size & build | |
| Cable shielding | 1-to-4 |
Questions about this item
Does the 0.5 m length add noticeable signal loss or heat when the cable runs all day at 6 Gbps?
The copper cable meets the SAS 2.1 specification for 6 Gbps, so a 0.5 m run stays within the standard’s signal-integrity and thermal limits for continuous operation.
What controller port must my server or RAID card already provide for the SFF-8643 host connector to plug in?
You need a Mini SAS HD SFF-8643 host port; the cable will not work with a PCIe SFF-8643 controller.
Can I attach my older 29-pin SAS or SATA drives directly to the four SFF-8482 device ends?
Yes, each of the four SFF-8482 connectors accepts a standard 29-pin SAS or SATA drive.
More in SAS, SCSI, InfiniBand & MCIO Cables





