Vszerda Mini SAS SFF-8643 to SFF-8643 cable 3.3FT 12Gb/s
Internal SAS cable with 36-pin SFF-8643 connectors on both ends, 3.3 ft long, rated for 12 Gb/s
- Rated speed12 GB/s
- Connector count36
- Connector detailsMini Sas
- Connector genderMale-to-Male
- Product typeSAS
- Product colorMini SAS 8643 to Mini SAS 8643
- 12 Gb/s data throughput with SAS 3.0 support
- 36-pin high-density SFF-8643 connectors on both ends
- 3 ft length fits standard chassis routing
- 30 AWG conductors for reliable internal signalling
- Male-to-male design links host and target directly
Internal SAS interconnect
This Vszerda cable links two SFF-8643 Mini SAS HD ports inside a chassis. It suits builders wiring RAID controllers, JBOD enclosures or backplanes that use the high-density connector. The male-to-male assembly arrives new and ready for internal routing.
Build integration
The 1.0 metre length reaches between adjacent drive cages or from a controller card to a backplane without excess slack. Thirty-six pins carry four lanes of SAS traffic through a 30 AWG black jacket. No shielding is fitted, so keep the run clear of noisy power cables.
Capacity and headroom
Rated for SAS 3.0 at 12 Gb/s per lane, the cable also supports SAS 2.1 at 6 Gb/s for older gear. It handles four simultaneous 12 Gb/s lanes, saturating typical SSD or HDD arrays. Builds needing external ports or higher lane counts will need different cabling.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 87% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Product type | SAS |
| Product color | Mini SAS 8643 to Mini SAS 8643 |
| Performance | |
| Rated speed | 12 GB/s |
| Ports & slots | |
| Connector count | 36 |
| Connector details | Mini Sas |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | No |
Questions about this item
What maximum data rate does the 12Gb/s SFF-8643 cable sustain under continuous load?
The cable is rated for 12Gb/s SAS 3.0 and remains compliant with the SAS 2.1 6Gb/s specification for backward compatibility.
Does the 30AWG unshielded cable generate noticeable heat or signal degradation during all-day operation?
The 30AWG construction carries the 12Gb/s signal without active cooling; heat rise is minimal inside a typical chassis airflow.
Which host-side connector must my backplane or HBA already provide for this male-to-male SFF-8643 assembly?
The cable requires a female SFF-8643 port on both the controller and the drive backplane to complete the 36-pin link.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
EN-Labs SFF-8643 to 4×SFF-8482 SAS cable with SATA 15-pin power 1.64ft
- Others
- Black & Blue
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
10Gtek Mini SAS SFF-8087 cable, 1.64 ft, 2 pack
- Cable Connectors
- Black





