We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 connector fanning out to four SATA plugs on flat ribbon cables with woven mesh sheathing and P1-P4 labels

Vszerda

Vszerda MiniSAS SFF-8087 Fan-Out Cable Breakout to 4xSATA 6Gbps 0.8m

SKU CH-JKQP-AWQST

Connects a 36-pin SFF-8087 port to four SATA drives at 6 Gbps per channel over 0.8 m

  • Rated speed6 Gbit/s
  • Connector count64
  • Connector detailsSff-8087 to 4x Sata
  • Connector genderMale-to-Male
  • Cable shieldingData Transfer
  • Product typeInternal Mini SAS HD Cable
  • Connect RAID controllers to four SATA drives via SFF-8087 host port
  • 6 Gbps per channel supports fast storage throughput
  • 100 Ohm impedance maintains signal integrity across the link
  • Low-profile SATA connectors with steel latches resist vibration disconnects
  • P1–P4 markers simplify port identification after installation

MiniSAS SFF-8087 Breakout Cable

This new Vszerda cable splits a single internal MiniSAS SFF-8087 host port into four SATA 6Gbps device connections. It is built for servers, RAID controllers and storage enclosures that use a 36-pin SFF-8087 interface to attach SATA drives or backplanes.

Suits direct-attached SATA drives.

The cable works when the controller or motherboard provides the MiniSAS SFF-8087 host side and the targets are SATA drives or a SATA backplane. It will not suit builds where the host connector is SATA and the target requires a MiniSAS plug, nor configurations that need an external MiniSAS interface.

0.8 m length with 100 Ohm impedance

Each of the four channels supports up to 6 Gbps across a 100 Ohm differential pair. The 0.8 metre ribbon assembly uses acetate cloth tape and a woven mesh sheath for strain relief and easier routing inside a chassis.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 73% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand name10Gtek
Model nameCB-001
Product typeInternal Mini SAS HD Cable
Product color1PC
Performance
Rated speed6 Gbit/s
Ports & slots
Connector count64
Connector detailsSff-8087 to 4x Sata
Connector genderMale-to-Male
Size & build
Cable shieldingData Transfer

Questions about this item

What host connector must my RAID controller or motherboard provide for this cable to work?

The cable requires a 36-pin SFF-8087 port on the host side to connect to a RAID controller or motherboard.

Will the 6 Gbps channels on this cable still operate correctly with older 3 Gbps SATA drives I plan to keep?

Yes, each 6 Gbps channel is backward compatible and will negotiate down to 3 Gbps with older SATA drives.

How can I verify each drive is linked at the correct speed after I connect the four SATA ends?

Check the RAID controller BIOS or OS disk utility; each of the four P1–P4 lanes should report a 6 Gbps link when a 6 Gbps drive is attached.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items