We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
MiniSAS SFF-8087 straight connector branching to four right-angle SATA plugs on 0.5 m cable

Vszerda

Vszerda MiniSAS SFF-8087 to 4x SATA Cable 0.5 m 6 Gbps

SKU CH-HK96-FT2NM

Connects four SATA drives to an SAS controller with a 0.5 m forward breakout cable supporting 6 Gbps per channel

  • Rated speed6 Gbit/s
  • Connector count36
  • Connector detailsSff-8087 to 4x Sata
  • Connector genderMale-to-Male
  • Cable shieldingData Transfer
  • Product typeSAS to SATA
  • Connect four SATA drives to one SAS controller
  • 6 Gbps per channel for fast data transfer
  • 5 m length suits compact server builds
  • Right-angle SATA plugs ease tight drive-bay routing
  • AWG30 twinaxial 8-pair wire ensures signal integrity

Straight-to-Right-Angle Breakout Cable

This new Vszerda MiniSAS SFF-8087 fan-out cable connects a single SAS controller port to four SATA drives inside a server or storage enclosure. The 0.5-metre length suits tight chassis routing where a short reach keeps airflow clear. It is built for administrators who need reliable 6 Gbps links between a host adapter and direct-attached SATA storage.

Installation Notes

The SFF-8087 plug inserts straight into the controller while each SATA connector angles right, so cable dress follows the drive bay edge without sharp bends. AWG30 twinaxial pairs are stiff; forcing a tight radius can kink the dielectric and raise skew. Verify the controller bracket clears the right-angle bodies before latching, and seat each SATA plug fully to avoid intermittent detection.

Pre-Order Checks

Confirm the controller presents a standard SFF-8087 receptacle and that the enclosure drives use SATA data ports, not SAS-only backplanes. The cable is a forward breakout — host on the SAS end, drives on the SATA end — so it will not work in a reverse topology. Ensure the 100 Ohm impedance matches the controller specification and that 0.5 metres reaches from the card slot to the furthest drive bay.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 77% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand name10Gtek
Product typeSAS to SATA
Product color1PC
Performance
Rated speed6 Gbit/s
Ports & slots
Connector count36
Connector detailsSff-8087 to 4x Sata
Connector genderMale-to-Male
Size & build
Cable shieldingData Transfer

Questions about this item

How can I verify the SFF-8087 to 4x SATA cable is functioning correctly after installation?

The system BIOS or RAID controller utility should detect all four connected SATA drives at up to 6 Gbps per channel without errors.

What comes with the Vszerda MiniSAS cable and what must I source separately?

The package includes the 0.5 m AWG30 twinaxial breakout cable with a straight SFF-8087 plug and four right-angle SATA connectors; you must provide the SAS controller and SATA drives.

Which version of this breakout cable should I choose for a standard internal RAID controller?

Select the forward breakout SFF-8087 to 4x SATA model with straight-to-right-angle ends for direct host-to-drive connections.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items