Vszerda OCuLink SFF-8611 4i to SFF-8654 Active Cable 50cm
Connects an OCuLink SFF-8611 controller to an SFF-8654 backplane at 8Gbps over 50cm with active latching
- Rated speed8 Gbit/s
- Connector detailsOculink
- Connector genderMale-to-Male
- Cable shieldingData Transfer
- Product typeOculink PCIE
- Product colorBlack
- Connect backplanes to controllers with SFF-8611 and SFF-8654 ports
- Active latch locks securely to prevent accidental disconnection
- 8 Gbps data rate supports high-speed storage traffic
- 50 cm length fits compact server chassis
- Male-to-male design enables direct device-to-device links
Connector pairing
This Vszerda cable links an OCuLink SFF-8611 4i port to an SFF-8654 Slimline connector. It suits builders wiring a backplane to a host controller inside a server or workstation chassis.
8 Gbps signalling
The active cable supports data transfer rates up to 8 Gbps per lane. That single speed figure determines whether the link matches your controller and backplane specification.
Thermals and power
Active circuitry draws a small amount of power from the host port and generates negligible heat. No fan or heatsink is required and the cable adds no audible noise to the system.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 58% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Xiwai |
| Model name | SF-060-XY |
| Product type | Oculink PCIE |
| Product color | Black |
| Performance | |
| Rated speed | 8 Gbit/s |
| Ports & slots | |
| Connector details | Oculink |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
Questions about this item
What does the 8 Gbps transfer rate mean once the cable is installed in my system?
The cable carries up to 8 Gbps per lane across four lanes, giving the attached SFF-8654 backplane or SSD the full bandwidth the controller provides.
How does the OCuLink SFF-8611 to SFF-8654 interface limit real-world performance?
The link is rated at 8 Gbps per lane, so throughput cannot exceed that electrical ceiling regardless of the drive or controller used.
What clearance and latch space do I need to fit the 50 cm active cable and its connectors?
The 50 cm length suits typical chassis routing, and each end uses a male connector with an active latch that locks into the mating SFF-8611 or SFF-8654 port.
More in SAS, SCSI, InfiniBand & MCIO Cables





