We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black cable with SFF-8088 connectors on both ends

Vszerda

Vszerda SAS cable SFF-8088 to SFF-8088 26pin 6Gbps .5m 30AWG

SKU CH-RJM7-FZQM8

A 0.5-metre SAS cable with SFF-8088 connectors on both ends, 26-pin, 30AWG twinaxial construction supporting 6 Gbps per channel at 100-ohm impedance

  • Rated speed6 Gbit/s
  • Connector count26
  • Connector detailsSfp
  • Connector genderMale-to-Male
  • Cable shieldingHigh Speed
  • Product typeSAS
  • 6 Gbps per channel enables fast external storage links
  • 26-pin SFF-8088 connectors fit Mini-SAS ports directly
  • 100-ohm impedance twinaxial cable reduces signal skew
  • 5-metre length keeps rack runs tidy
  • Hot-pluggable design allows live SAS device swaps

External Mini SAS SFF-8088 Cable

This new Vszerda cable connects two external Mini SAS SFF-8088 ports using a 26-pin male-to-male assembly. It measures 0.5 metres (1.64 feet) and uses 30AWG twinaxial conductors with eight pairs. The link is rated for 6Gbps per channel and maintains a 100-Ohm impedance for low-skew transmission. It is compliant with both 3Gb/s and 6Gb/s SAS protocols.

Suited for short external SAS links

Administrators building or servicing server, storage or DAS enclosures that use external SFF-8088 ports will find the half-metre length convenient for rack-adjacent connections. The hot-pluggable design allows insertion without powering down. Builders who need longer reach, internal backplane connectors or a different pin count should choose another cable type.

6Gbps per channel over 0.5 metre

The single specification that determines fit is the 6Gbps per channel rating across the 0.5-metre twinax assembly. This bandwidth matches 6Gb/s SAS controllers and external enclosures, while the 100-Ohm impedance preserves signal integrity. If the target equipment requires a higher signalling rate or a longer passive run, this cable will not meet the requirement.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $25.99
Typical for this category: the median of 1,224 items is $26.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameH!Fiber.com
Product typeSAS
Product colorSFF-8088 to SFF-8088
Performance
Rated speed6 Gbit/s
Ports & slots
Connector count26
Connector detailsSfp
Connector genderMale-to-Male
Size & build
Cable shieldingHigh Speed

Questions about this item

Do both my controller and enclosure need SFF-8088 ports for this cable to work?

Yes, each end terminates in a 26-pin SFF-8088 male connector, so both devices must present that port.

Will this cable negotiate down to 3 Gb/s if my older HBA only supports that speed?

The assembly is compliant with both 3 Gb/s and 6 Gb/s SAS protocols, so it will operate at the lower rate when required.

How can I confirm the link is running at 6 Gb/s after I connect it?

Check the HBA or RAID utility for a reported link speed of 6 Gb/s per lane on the attached port.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items