Vszerda SFF-8087 Internal Mini SAS Cable 1.6m 36-pin 6G
Connects RAID cards or backplanes to SAS and SATA drives at 6 Gbps over 1.6 m with locking 36-pin SFF-8087 connectors
- Rated speed6 Gbit/s
- Connector count36
- Connector genderMale-to-Male
- Cable shieldingData Transfer
- Product typeInternal Mini SAS HD Cable
- Product color1PC
- 6 Gbps data rate for SAS or SATA storage
- 36-pin SFF-8087 male connectors on both ends
- Braided mesh jacket with individual lane shielding
- Tape strain relief prevents rigidity at connectors
- 6 m length fits server backplane to RAID card runs
Vszerda SFF-8087 Internal Mini SAS Cable
This new Vszerda SFF-8087 Internal Mini SAS Cable is a 1.6m Male-to-Male assembly rated for 6 Gbps data transfer. It uses a 36-pin connector on each end and is built for server and storage environments. The 100-Ohm shielded ribbon construction supports hot-swap SATA and SAS drive bays.
Suited for RAID cards and backplanes using SFF-8087
The cable fits internal SAS or SATA storage systems, HBA interfaces and direct-attached storage where a 36-pin SFF-8087 link is required. Builders needing a different pin count, an external connector style, or a longer reach for the same internal run should look at other assemblies.
36-pin SFF-8087 Male-to-Male at 6 Gbps
The single specification that decides fit is the 36-pin SFF-8087 Male-to-Male interface operating at 6 Gbps. If your backplane or RAID controller calls for this exact connector and speed, the cable matches; otherwise it will not connect.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 87% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | 10Gtek |
| Product type | Internal Mini SAS HD Cable |
| Product color | 1PC |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector count | 36 |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | Data Transfer |
Questions about this item
Will the SFF-8087 connectors or the braided jacket need replacement after repeated hot-swap cycles?
The industrial-grade braided mesh jacket and stainless steel latch are built for secure connections in server RAID systems and hot-swappable drive bays.
Does the 1.6 ft length or 100-ohm impedance limit signal integrity on a fully loaded 6 Gbps SAS backplane?
The cable is specified for 6 Gbps transfers over four lanes with 100-ohm impedance, matching the SAS 4-lane design used in server and storage applications.
How much heat does the individually shielded ribbon cable generate during all-day RAID array rebuilds?
The passive copper assembly has no active components; heat is limited to normal conductor loss at 6 Gbps and the braided jacket aids dissipation.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
EN-Labs SFF-8643 to 4×SFF-8482 SAS cable with SATA 15-pin power 1.64ft
- Others
- Black & Blue
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
10Gtek Mini SAS SFF-8087 cable, 1.64 ft, 2 pack
- Cable Connectors
- Black





