We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 1-metre SFF-8087 male-to-male Mini SAS cables, blue Twinax with gold contacts

Vszerda

Vszerda SFF-8087 to SFF-8087 6G SAS cable 1m 2 pack

SKU CH-2VZ6-XJ4Q0

Two 1-metre SFF-8087 cables connect RAID cards or HBAs to backplanes at 6 Gbps for SAS and SATA drives

  • Rated speed6 Gbit/s
  • Connector count72
  • Connector detailsSff-8087 to Sff-8087
  • Connector genderMale-to-Male
  • Cable shieldingData Transfer
  • Product typeInternal Mini SAS HD Cable
  • Dual SFF-8087 connectors support SAS 6.0 Gbps and SATA 3.0 for RAID controllers
  • 100-ohm Twinax copper with full EMI shielding ensures stable data transfers
  • 1-meter length optimised for clean routing in rack servers and NAS enclosures
  • Gold-plated contacts and reinforced strain relief tested for 24/7 heavy workloads
  • Two-cable pack enables multi-drive configurations with LSI/Broadcom RAID cards and backplanes

Connectivity scope

This Vszerda cable pair uses dual SFF-8087 male connectors rated for 6 Gbps SAS and SATA 3.0 speeds. Each assembly is built with 100-ohm impedance twinax copper and full EMI shielding for stable transfers in dense server chassis. The one-meter length keeps routing tidy inside rack servers, NAS enclosures or workstations. Two cables are included for multi-drive configurations.

Who it fits

Suits administrators wiring RAID controllers, HBAs or backplanes that expose the SFF-8087 36-position interface. Builders expanding direct-attached storage with SAS or SATA drives will find the gold-plated contacts and reinforced strain relief rated for continuous operation. Buyers whose equipment uses newer mini-SAS HD or mini-SAS 4i connectors must select a different cable family.

Deciding specification

The single specification that decides fit is the SFF-8087 36-pin connector on both ends combined with the 6 Gbps SAS/SATA 3.0 rating. If the host controller or backplane presents that exact interface, the pair will connect directly; otherwise an adapter or alternative cable is required.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 58% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand name10Gtek
Model nameCAB-8087
Product typeInternal Mini SAS HD Cable
Product color2PC
Performance
Rated speed6 Gbit/s
Ports & slots
Connector count72
Connector detailsSff-8087 to Sff-8087
Connector genderMale-to-Male
Size & build
Cable shieldingData Transfer

Questions about this item

What clearance does the 36-pin SFF-8087 connector need on the backplane side?

The 36-position SFF-8087 male connector fits standard mini SAS ports on RAID cards and server backplanes; allow enough depth for the strain-relief boot behind the latch.

Which orientation do the keyed SFF-8087 plugs go in, and what mistake do installers make?

Each plug is keyed so it seats only one way; the common error is forcing the connector upside-down, which bends the latch or damages the 100-ohm twinax pairs.

When should the cable set be replaced in a 24/7 RAID array?

Replace if the gold-plated contacts show corrosion, the shielding braid is crushed, or intermittent errors appear on drives connected through either 1-metre assembly.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items