We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
.5 m Mini SAS HD cable with SFF-8643 connectors at both ends

Vszerda

Vszerda SFF-8643 to SFF-8643 12G Mini SAS HD cable .5m

SKU CH-PDAF-207FE

Connects SAS and NVMe devices at 12 Gbps per lane with 100-ohm impedance in a .5 m male-to-male Mini SAS HD cable

  • Rated speed12 Gbit/s
  • Connector count32
  • Connector detailsSff-8643 to Sff-8643
  • Connector genderMale-to-Male
  • Cable shieldingData Transfer
  • Product typeSAS-SFF-8643
  • 12 Gbps per lane for high-throughput storage
  • 48 Gbps aggregate bandwidth across four lanes
  • 100 Ohm impedance preserves signal integrity
  • 5 m length reduces latency inside the chassis
  • Sideband support enables robust drive management

Vszerda SFF-8643 12G SAS Cable

This Vszerda cable connects two SFF-8643 ports for internal SAS or NVMe backplane links. It targets server builders and storage integrators who need a short, high-density interconnect inside a chassis. The 0.5-metre length keeps the run tidy in tight enclosures. Male-to-male terminals plug directly into RAID controllers or expander boards.

Sustained 12Gbps Lane Performance

Each of the four lanes is rated for 12Gbps, giving an aggregate 48Gbps across the 32-conductor assembly. The 100-Ohm impedance and sideband signalling preserve signal integrity under continuous heavy I/O. Short straight-through construction reduces latency and crosstalk during prolonged transfers. Hot-swap and SATA backward compatibility remain active throughout sustained workloads.

Verify Connector And Clearance First

Confirm both endpoints use SFF-8643 receptacles before ordering; other mini-SAS variants will not mate. Ensure the 0.5-metre reach spans the intended device spacing without strain. Check that chassis routing allows the cable bend radius and that sideband pins align with your controller firmware. No adapters or alternative lengths are included.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 92% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand name10Gtek
Product typeSAS-SFF-8643
Product color1PC
Performance
Rated speed12 Gbit/s
Ports & slots
Connector count32
Connector detailsSff-8643 to Sff-8643
Connector genderMale-to-Male
Size & build
Cable shieldingData Transfer

Questions about this item

Does the 0.5 m SFF-8643 cable generate noticeable heat or draw extra power when running 12 Gbps all day?

The passive 0.5 m SFF-8643 cable has no active components, so it adds negligible heat and draws no power during continuous 12 Gbps operation.

What host hardware must I already have to use this SFF-8643-to-SFF-8643 link?

You need a RAID controller, HBA or NVMe backplane equipped with SFF-8643 ports; the cable is male-to-male and requires matching female receptacles on both ends.

Will this 12 Gbps SFF-8643 cable work with the 6 Gbps SATA drives I plan to keep?

Yes, the SFF-8643 interface supports SATA signalling, so 6 Gbps SATA drives connect through the cable and run at their native speed.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items