We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8644 to SFF-8088 SAS cable, 3.3ft, male-to-male connectors

Vszerda

Vszerda SFF-8644 to SFF-8088 SAS cable 3.3ft 6Gbps

SKU CH-N4S1-MCS89

Connects SFF-8644 and SFF-8088 ports for 6Gbps SAS and SATA links in RAID, servers and storage racks

  • Rated speed6 Gbit/s
  • Connector count8
  • Connector detailsMini Sas
  • Connector genderMale-to-Male
  • Cable shieldingData Transfer
  • Product typeMini Sas
  • 6 Gbps per channel for fast SAS transfers
  • SFF-8644 to SFF-8088 hybrid connects internal and external gear
  • 3 ft 30 AWG cable fits tight server racks
  • Tested to SAS 2.1 and 3.0 specs for reliable RAID use
  • 100 ohm impedance and EMI shielding keep signals clean

SFF-8644 to SFF-8088 SAS cable 3.3 ft

This Vszerda cable connects internal SFF-8644 ports to external SFF-8088 ports for SAS and SATA links. It is built as a 30 AWG hybrid assembly measuring 3.3 ft with male-to-male terminals. The design supports 6 Gbps per channel and is tested to Serial Attached SCSI 6.0 Gbps certification before dispatch.

RAID arrays, servers and external storage builds

The cable suits RAID systems, data-centre racks, servers, storage arrays, HBA cards and direct-attached storage where an internal-to-external SAS link is required. Builds that need longer runs, higher lane speeds or a different connector pairing should look at other options.

6 Gbps per channel over 3.3 ft

The single specification that decides fit is the 6 Gbps per channel rating across the 3.3 ft length with SFF-8644 to SFF-8088 ends. Match this speed and connector combination to your controller and enclosure specs before ordering.

How it compares

Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.

Price $33.99
Pricier than about 75% of the 1,224 comparable items (median $26.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameH!Fiber.com
Product typeMini Sas
Product colorSFF-8644 to SFF-8088
Performance
Rated speed6 Gbit/s
Ports & slots
Connector count8
Connector detailsMini Sas
Connector genderMale-to-Male
Size & build
Cable shieldingData Transfer

Questions about this item

What clearance does the SFF-8644 plug need behind the bulkhead?

The male-to-male Mini SAS connectors each need enough rear-panel depth for the plug body and latch release; allow space behind the bulkhead for the connector hood and cable bend radius.

How do you seat the SFF-8644 and SFF-8088 ends without damaging the latch?

Align the keyed plug, push straight in until the latch clicks, then pull gently to confirm it is locked; the common error is rocking the connector sideways which can bend the latch tab.

When should this 30AWG 6Gbps cable be replaced?

Replace it if the latch no longer holds, the hood is cracked, or you see intermittent link errors on SAS 2.1 or 3.0 ports after ruling out drive and controller faults.

More in SAS, SCSI, InfiniBand & MCIO Cables

Similar items