Vszerda SlimSAS SFF-8654 to SFF-8654 8i SAS 4.0 Cable 0.75m 24Gbps
Internal SlimSAS cable connects SFF-8654 8i ports at 24 Gbps over 0.75 m with 100 Ohm impedance
- Rated speed24 Gbit/s
- Connector detailsSff-8654 to Sff-8654 8i
- Connector genderMale-to-Male
- Product typeInternal SlimSAS Cable
- Overall length0.75
- DetailsInternal SlimSAS Cable
- 24Gbps data rate for fast SAS 4.0 storage links
- 75m length fits tight server chassis
- 74-pin high-density connector ensures signal integrity
- 100-ohm impedance with 32AWG ribbon cable reduces crosstalk
- Straight 8i plug design simplifies internal cable routing
Internal 24Gbps SlimSAS Cable
The Vszerda SlimSAS SFF-8654 to SFF-8654 8i cable carries SAS 4.0 signals at up to 24Gbps through a 100-ohm, 32AWG ribbon assembly. Its 74-pin straight plugs connect controllers or backplanes inside servers, workstations and storage arrays. The 0.75m length suits dense chassis where excess cable would block airflow.
High-density SAS and NVMe links
Builders wiring 8i wide ports for SAS drives or NVMe U.2/U.3 bays will use this cable; it matches the SAS-4 electrical specification and the SFF-8654 form factor. Installations that need right-angle plugs, external bulkheads or a different pin count should choose another assembly.
SFF-8654 8i straight connector
The cable terminates in straight, male-to-male SFF-8654 8i plugs on both ends. This single physical interface decides fitment — verify the target port accepts a straight 74-pin plug before ordering.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 67% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Ipolex |
| Product type | Internal SlimSAS Cable |
| Performance | |
| Rated speed | 24 Gbit/s |
| Ports & slots | |
| Connector details | Sff-8654 to Sff-8654 8i |
| Connector gender | Male-to-Male |
Questions about this item
What clearance does the 0.75 m SlimSAS SFF-8654 8i cable need inside a server chassis?
The ribbon-style cable uses a straight 11# plug and 32 AWG conductors, so it fits low-profile internal I/O routing without blocking adjacent slots.
Which orientation do the 74-pin SFF-8654 male connectors require during installation?
Both ends are identical male-to-male straight plugs; align the keyed notch on each connector with the receptacle before pressing firmly until the latch clicks.
When should the cable be inspected or replaced in a 24 Gbps SAS 4.0 storage array?
Check for bent pins, kinked ribbon sections or latch damage during any drive-tray service; replace if signal errors appear or after repeated mate cycles.
More in SAS, SCSI, InfiniBand & MCIO Cables





