Vszerda SlimSAS x8 74pin to 2x x4 38pin 80cm Cable
Connects one x8 74-pin SFF-8654 port to two x4 38-pin SFF-8654 ports for SAS backplanes
- Connector count112
- Connector detailsSlimsas
- Connector genderMale-to-Male
- Cable shieldingHigh Speed
- Product typeSerial
- Product colorBlack
- Splits one x8 74pin link into two x4 38pin ports
- 80 cm length fits dense server chassis layouts
- High-speed shielding protects signal integrity for SAS traffic
- Male-to-male connectors mate directly with backplanes and controllers
- Compatible with Broadcom 9500, 9560 and 9580 series HBAs
Connection Layout
This Vszerda cable splits a single SlimSAS x8 74pin connector into two SlimSAS x4 38pin connectors. It follows the SFF-9402 reference design for SAS and PCIe protocols. The male-to-male terminations suit backplanes that present paired x4 SFF-8654 ports.
Installation Notes
The Y-shaped assembly routes cleanly inside a chassis because the 80cm length gives slack for cable management. High-speed shielding protects signal integrity during the initial seat. Builders must verify that the backplane pinout matches the SFF-9402 specification before connecting.
Sustained Operation
Shielded construction maintains link stability when the cable carries continuous SAS traffic. The SFF-8654 interface supports SAS-4 signalling rates without degradation over the run. Controllers such as the 9560-16i, 9560-8i, 9580-8i8e, 9500-16i and 9500-8i drive this cable under steady load.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 60% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Model name | ?????????????? x8 to 2*?????????????? x4 |
| Product type | Serial |
| Product color | Black |
| Ports & slots | |
| Connector count | 112 |
| Connector details | Slimsas |
| Connector gender | Male-to-Male |
| Size & build | |
| Cable shielding | High Speed |
Questions about this item
How do I confirm the SlimSAS x8 74pin to 2x x4 38pin cable is working correctly after connecting it to a backplane?
Verify the link comes up on a Broadcom 9560-16i, 9560-8i, 9580-8i8e, 9500-16i or 9500-8i controller and that the backplane reports two x4 SFF-8654 connections following the SFF-9402 pinout.
What does the package contain and what extra items are required for installation?
The box includes the Y-cable with one SlimSAS x8 74pin plug and two SlimSAS x4 38pin plugs; you must supply a compatible backplane with dual x4 SFF-8654 ports and a supported Broadcom controller.
Which version of the SlimSAS Y-cable should I choose for a Broadcom 9560-8i controller?
Select the x8 74pin (SFF-8654) to 2x x4 38pin (SFF-8654) cable built to the SFF-9402 reference, as used with Broadcom part 05-60004-00 and cable part 5067-6103.
More in SAS, SCSI, InfiniBand & MCIO Cables





