Vszerda USB 2.0 Male to 2 Pin Bare Wire 30cm 22AWG 2-Pack
A 30 cm USB 2.0 male-to-bare-wire pigtail for 5 V 3 A DIY power projects, 22 AWG with tinned leads for easy soldering, two cables included
- Rated speed480 Mbit/s
- Connection typeUSB Type A
- Connector count4
- Connector detailsUSB Type A
- Connector genderMale-to-Male
- Build detailsPVC
- DIY power cable with USB-A male and 2-pin bare wire ends
- 30 cm length fits tight enclosures and short runs
- 22 AWG pure copper conductors carry 5 V at 3 A
- Tinned wire tails simplify soldering or screw-terminal connections
- Double-insulated PVC jacket protects against wear and short circuits
Ready-to-use USB power leads
This 2-pack supplies short USB 2.0 male plugs with 2-pin bare-wire tails for DIY power connections. Each 30 cm lead uses 22 AWG copper conductors and carries 5 V at up to 3 A. The red wire marks positive and the black wire marks negative.
Suits hobbyists and repair jobs
Builders who need a quick 5 V feed for LED strips, USB fans or low-power boards will find these convenient. Projects that require data lines, longer runs or higher current should look at other cable types.
22 AWG copper with tinned ends
The 22 AWG gauge and pre-tinned bare wires let you solder or screw-terminal the connections without stripping. This single spec decides whether the lead fits your prototype or repair.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Maixbomr |
| Product type | USB |
| Product color | Black |
| Performance | |
| Rated speed | 480 Mbit/s |
| Ports & slots | |
| Connection type | USB Type A |
| Connector count | 4 |
| Connector details | USB Type A |
| Connector gender | Male-to-Male |
| Size & build | |
| Build details | PVC |
Questions about this item
Will this USB 2.0 male pigtail power a legacy 5 V device that draws up to 3 A?
Yes, the cable is rated for 5 V at 3 A and uses 22 AWG pure copper conductors, so it can supply that current to older USB-powered gear.
How can I confirm the polarity before soldering the bare ends?
The red wire is the positive pole and the black wire is the negative pole, matching the 5 V/3 A specification printed on the cable.
Does the pack include any connectors or heat-shrink for the bare wires?
The package contains only two 30 cm USB 2.0 male to 2-pin bare-wire cables; terminals, heat-shrink or solder are not included.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





