Vszerda USB 3.0 19-Pin Internal Header to USB 3.1/3.2 Type-C 20-Pin A-Key Front Panel Adapter
Connects a motherboard 19-pin USB 3.0 header to a 20-pin USB 3.1/3.2 Type-C A-Key front-panel adapter
- Connection typeUSB Type C
- Connector detailsUSB Type C
- Build detailsCopper
- Adds USB-C front-panel access via a 19-pin header
- Works with any motherboard that has a USB 3.0 19-pin connector
- Copper construction for reliable signal transfer
- Connects a 20-pin A-Key front-panel header to the board
- Does not increase the link speed beyond 5 Gb/s
Compatibility with 19-pin headers
This adapter connects a motherboard USB 3.0 19-pin internal header to a front-panel USB 3.1 A-key 20-pin female header. It lets builders add a USB-C port to cases that only provide the newer 20-pin connector. No motherboard upgrade is required to gain front-panel USB-C access.
Signal pass-through without speed conversion
The adapter carries the existing 5 Gb/s signalling from the 19-pin header to the 20-pin front-panel port. It does not convert the link to 10 Gb/s, so sustained transfers remain at the host header’s native rate. Performance is therefore limited by the motherboard’s USB 3.0 controller rather than the adapter itself.
Copper construction and A-key orientation
Copper conductors provide reliable signal integrity across the short internal run. The A-keyed 20-pin female header ensures correct alignment with compatible front-panel cables, preventing reversed insertion. The straightforward pinout makes installation a simple one-to-one connection inside the chassis.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | EZDIY-FAB |
| Ports & slots | |
| Connection type | USB Type C |
| Connector details | USB Type C |
| Size & build | |
| Build details | Copper |
Questions about this item
How much extra power draw or heat does the Vszerda adapter add when the USB-C front panel port runs all day?
The adapter is a passive copper assembly with no active electronics, so it adds negligible power draw and no measurable heat during continuous use.
What must my motherboard already have for this Vszerda adapter to work?
Your motherboard needs a USB 3.0 internal 19-pin header; the adapter plugs into that header and provides a USB 3.1 A-Key 20-pin female connector for the front panel.
Will the Vszerda adapter let my older USB 3.0 19-pin header run a USB 3.2 Gen 2 front-panel port at 10 Gb/s?
No, the adapter does not convert the 5 Gb/s header bandwidth to 10 Gb/s; the front-panel port will operate at USB 3.0/3.1 Gen 1 speeds.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





