Vszerda USB 3.0 A Female Screw Mount to 20-pin Header 90° Angled 25cm
Connects a motherboard 20-pin header to a screw-mount USB 3.0 Type-A port with a 90° angled 25 cm cable for tight spaces
- Rated speed5 GB/s
- Connection typeUsb3.0 Type-a to 19pin/20pin
- Connector count24
- Connector detailsUsb3.0 Type-a to 19pin/20pin
- Connector genderMale
- Build detailsCopper
- Screw-mount female port secures front-panel USB 3.0 connections
- 90-degree angled header fits tight motherboard clearances
- 25 cm cable reaches front-panel headers without strain
- 20-pin header converts to USB 3.0 Type-A speeds
- Copper construction supports 5 gigabytes_per_second data rates
USB 3.0 Front-Panel Adapter Cable
This 25 cm cable converts a motherboard 20-pin header into a single USB 3.0 Type-A port with screw-mount flanges. The 90-degree angled header lets builders route the connection in tight chassis corners. It targets system integrators and DIY enthusiasts adding front-panel USB 3.0 to cases that lack a native header.
Bandwidth and Connector Limits
The link runs at the USB 3.0 5 Gbps signalling rate over copper conductors. The 24-contact header plug mates with standard 19/20-pin motherboard sockets, but the assembly provides only one Type-A receptacle, so a second front-panel port requires an additional cable. Length is fixed at 25 cm, restricting placement to nearby drive bays or front-panel cut-outs.
Mounting Hardware Included
Two screw holes on the Type-A flange secure the port to a chassis cut-out, preventing the connector from pushing back during cable insertion. No driver disc, software utility or additional brackets are bundled; the cable is a purely passive mechanical and electrical adapter.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 70% of the 15,227 comparable items (median $14.99).
Specifications
| Product | |
|---|---|
| Brand name | Vszerda |
| Product type | USB3.0 |
| Performance | |
| Rated speed | 5 GB/s |
| Ports & slots | |
| Connection type | Usb3.0 Type-a to 19pin/20pin |
| Connector count | 24 |
| Connector details | Usb3.0 Type-a to 19pin/20pin |
| Connector gender | Male |
| Size & build | |
| Build details | Copper |
Questions about this item
Will the 20-pin header fit my motherboard that only has a 19-pin USB 3.0 connector?
The cable uses a 19-pin/20-pin connector that matches standard motherboard USB 3.0 headers, so it will connect to either pin count.
How can I verify the 5 Gbps link is active after installing the angled cable?
Check the operating system device manager or USB controller view — it should list the port as SuperSpeed or USB 3.0 running at 5 Gbps.
Does the package include mounting screws for the two screw holes on the Type-A end?
The cable has two screw holes on the female Type-A connector, but screws are not included and must be sourced separately.
More in USB Cords & Extension Cables
Similar items
ESTONE PQ001 USB4 Gen 3x2 cable 3.3ft 40Gbps 240W Copper
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE TJ-A323 USB4 cable 1.6ft 40Gbps 100W 8K@60Hz
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek 240W USB4 cable 1.6Ft 40Gbps 8K@60Hz
- USB C to USB C
- USB4





