We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 adapter cable with dual Type-C and Type-A connectors to SATA 22-pin for 2.5-inch SSD

Vszerda

Vszerda USB 3.0 Type-C & Type-A Dual Connector to SATA 22 Pin 2.5" SSD Adapter Cable 5Gbps

SKU CH-VNB9-HDGFS

Connects a 2.5" SATA SSD to USB-C or USB-A ports at up to 5Gbps with plug-and-play simplicity

  • Product typeUSB
  • Product colorBlack
  • Key featuresDual Connector
  • Transfer up to 5Gbps with USB 3.0 SuperSpeed
  • Works with SATA 1.5, 3.0 and 6Gbps drives
  • Dual USB-C and USB-A connectors for any laptop
  • Powers 2.5" SSDs without an external supply
  • Plug-and-play on Windows, Linux and macOS

Dual-connector USB 3.0 to SATA adapter for 2.5"

This cable connects a 2.5-inch SATA solid-state drive to a computer using either a USB Type-C or Type-A port. It is designed for laptop users who need quick access to data from an internal drive without opening the chassis. The adapter supports mass storage class devices and works across Windows, Linux and macOS with no driver installation required. Bus power eliminates the need for an external supply.

Sustained throughput limited by SATA generation

Under continuous operation the link runs at the speed of the installed drive's SATA generation, reaching 150 MB/s, 300 MB/s or 600 MB/s for Gen1, Gen2 or Gen3 respectively. The USB 3.0 host caps the ceiling at 5 Gbps, so a Gen3 drive will not exceed the bus limit during long transfers. Backward compatibility with USB 2.0 drops the maximum to 480 Mbps if an older port is used. Hot-swapping is supported so drives can be changed without rebooting.

Check drive height and host port before ordering

The adapter only accepts 2.5-inch drives and will not power a 3.5-inch hard disk. Verify that the target drive uses a standard 22-pin SATA connector and fits the 2.5-inch form factor. Ensure the host computer provides a USB Type-C or Type-A port compliant with USB 3.0 for full speed, though USB 2.0 and 1.1 ports will function at reduced rates. No external power brick is included or required.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $17.99
Pricier than about 70% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameNGFF
Product typeUSB
Product colorBlack

Questions about this item

Does the adapter cable get warm or draw much power when a 2.5" SSD runs all day?

The cable is bus-powered and draws only what the USB 3.0 port supplies, so heat stays low during continuous use.

What host ports and drive do I need to use this adapter?

You need a USB 3.0 Type-C or Type-A port on the computer and a 2.5" SATA SSD or hard drive with a 22-pin connector.

Will it work with an older SATA 3.0 Gb/s drive I already own?

Yes, it is backward compatible with SATA 3.0 Gb/s drives and with USB 2.0 ports at up to 480 Mbps.

More in USB Cords & Extension Cables

Similar items