Vszerda USB A Male to 4 Pin Bare Wire 11inch 22AWG 480 Mbps 2-Pack
Two 11-inch USB-A male to four-pin bare-wire pigtails with 22 AWG copper cores for 5 V 3 A charging and 480 Mbps data
- Rated speed480 Mbit/s
- Connection typeUSB Type A
- Connector count4
- Connector detailsUSB Type A
- Connector genderMale-to-Male
- Build detailsPVC
- USB A male to bare 4-pin wire for DIY repair
- 22AWG copper cores carry 5V 3A power and 480 Mbps data
- Colour-coded leads simplify soldering to USB devices
- 11 inch length fits tight enclosures and prototypes
- Two cables included for spare or parallel projects
USB A male to bare-wire cable
This 2-pack provides USB Type A male plugs on one end and four colour-coded bare wires on the other. Each cable measures 30 cm (11 inches) and uses 22 AWG all-copper conductors inside a black PVC jacket. The pinout follows the standard USB scheme: red for 5 V power, black for ground, white for data minus and green for data plus.
DIY repair and low-power device builders
Makers who need to add a USB power or data connection to custom boards, LED lamps, small fans or similar 5 V 3 A equipment will find the pre-tinned tails convenient for soldering or screw terminals. Anyone requiring a finished connector such as Micro-USB, USB-C or a proprietary plug should look elsewhere, as this cable terminates in bare wire only.
480 Mbps data and 3 A charging headroom
The link supports USB 2.0 signalling at 480 Mbps, adequate for keyboards, mice, sensors or firmware updates on low-power gear. The 22 AWG copper cores carry the rated 3 A for charging phones, tablets or power banks, but the 30 cm length leaves no slack for routing around larger enclosures or distant ports.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Typical for this category: the median of 15,227 items is $14.99.
Specifications
| Product | |
|---|---|
| Brand name | Maixbomr |
| Product type | USB |
| Product color | Black |
| Performance | |
| Rated speed | 480 Mbit/s |
| Ports & slots | |
| Connection type | USB Type A |
| Connector count | 4 |
| Connector details | USB Type A |
| Connector gender | Male-to-Male |
| Size & build | |
| Build details | PVC |
Questions about this item
What type of USB port on my board or device must I have to plug this cable in?
You need a standard USB Type A female port, because the cable terminates in a USB Type A male plug.
Will the cable still carry data if I connect it to an older USB 1.1 header?
The cable supports up to 480 Mbps and will fall back to the slower speed of the older port.
How can I confirm the cable is delivering both power and data after I solder the four wires?
Measure 5 V between the red and black wires and verify the white and green pair carries a 480 Mbps signal with a USB analyser.
More in USB Cords & Extension Cables
Similar items
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
ESTONE PQ006 USB4 cable 3.3FT 240W 40Gbps 8K@60Hz Thunderbolt 3/4 black
- USB C to USB C
- USB4
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable
Jansicotek PQ005 USB4 cable 240W 40Gbps 8K 60Hz right angle 3.3FT
- USB C to USB C
- USB4





