Wavlink WL-NW2422GP 24-port Gigabit PoE+ network switch 250W

24-port Gigabit PoE+ switch for surveillance

The Wavlink WL-NW2422GP is an unmanaged switch with 24 PoE+ RJ45 ports that supply up to 30W each within a 250W total budget. Two Gigabit RJ45 uplinks and two 1000Mbps SFP slots provide flexible uplink paths for IP cameras, wireless access points and VoIP phones. Four hardware DIP switches let you enable VLAN isolation, CCTV extend mode, PD-ALIVE auto-reboot or port aggregation without any software configuration.

Suits installers who need simple PoE power

This switch fits rack-mounted surveillance racks and small business cabinets where plug-and-play deployment is required and VLAN segmentation or 250 metre camera reach are handled by DIP toggles. It does not serve buyers who need a managed web interface, SNMP monitoring, link aggregation control protocol or per-port power scheduling. Environments that demand more than 250W of PoE budget or 10G uplink speeds must look at a different class of switch.

250W PoE budget across 24 ports is the deciding

Every connected device draws from the shared 250W pool and no single port can exceed 30W, so the maximum number of powered devices depends on their individual power class. If the total load of cameras, access points and phones stays within 250W the switch powers them all; otherwise some ports will be denied power by the built-in priority protection.