WAWEIS AC Adapter for Q-See QC40198 19'' LCD Monitor with 8-Channel DVR
Replacement AC adapter for Q-See 19'' LCD monitor with built-in 8-channel DVR, 10 ft cord and 100-240V input
- World-wide 100-240 VAC input works on mains supplies everywhere
- 10 ft total cord length gives flexible placement options
- Over-current, over-voltage, short-circuit and total-power protections guard the monitor and DVR
- FCC, CE and RoHS certifications confirm compliance with safety and environmental standards
- 100 % compatible replacement for Q-See QC40198 19'' LCD monitor with 8-channel DVR
Power supply for Q-See 19-inch monitor DVR
This AC adapter replaces the original power supply for the Q-See QC40198 19-inch LCD monitor with a built-in 8-channel DVR. It delivers the correct voltage and polarity for that specific recorder model. The unit is intended for installers or owners who need a direct replacement for a lost or damaged mains brick.
Replaces the original QC40198 mains adapter
Use this adapter when the factory power supply for the Q-See QC40198, QC40198-1 or QC40198-814-5 fails or goes missing. The jump is worth it if the recorder will not power on and the original brick shows no output. Do not use it for other monitor sizes or DVR channel counts.
Plug-in installation with 10 ft cable
Connect the mains lead to a 100-240 VAC socket and the DC plug to the recorder; no tools or configuration are required. The 10 ft total cord length gives flexibility for wall or desk routing. The main risk is forcing the barrel connector if the centre-pin polarity does not match the recorder socket.
How it compares
Measured against everything we stock in Laptop Chargers & Batteries, at today’s prices. Recalculated every night.
- Price $23.99
- Cheaper than about 64% of the 27,790 comparable items (median $30.99).
Specifications
No published specifications for this item yet.
Questions about this item
What power-cord length does the adapter include for the 19'' Q-See monitor?
The adapter comes with a total 10 Ft power cord for the QC40198 19'' LCD monitor with built-in 8-channel DVR.
How do I connect the adapter to the Q-See QC40198 and what is the common mistake?
Plug the mains lead into a 100-240VAC 50/60Hz socket, then insert the DC barrel into the monitor's power port; the step often missed is seating the barrel fully until it clicks.
Which protection features should I monitor over the adapter's life on the QC40198?
The unit provides over-current, over-voltage, short-circuit and total-power protection; if any trips repeatedly, replace the adapter.
More in Laptop Chargers & Batteries
Similar items
No Sew HW03XL laptop battery 11.34V 3.44Ah 41.04Wh 3-cell Li-ion black
- Black
- 3.44 amp hours
Lenovo 0B46994 90W 20V AC adapter for ThinkPad X1 Carbon
- Black
- AC Adapter
No Sew HS04 laptop battery 14.8V 2200mAh 33Wh 4-cell black
- Lithium-Ion
- Black





