Weastlinks 15-pin power + 29-pin SAS SFF-8482 to 7-pin SATA SAS cable 50cm
Connects a 29-pin SAS SFF-8482 drive to 7-pin SATA and 15-pin power ports over 50cm
- Combines 15-pin power and 29-pin SAS into one cable
- 29-pin SFF-8482 connects to 7-pin SATA-style SAS port
- 6 Gb/s serial speed keeps SCSI command-set reliability
- 50 cm length fits tight chassis routing
- Replaces legacy parallel SCSI with flexible serial link
Cable configuration
This cable combines a 15-pin SATA power plug, a 29-pin SAS SFF-8482 connector and a 7-pin SATA-style SAS port in a single 50 cm assembly. It is built for technicians who need to attach a SAS drive to a system that supplies SATA power and a SATA-style SAS data header.
Setup verification
Confirm that the target drive uses a 29-pin SAS SFF-8482 interface and that the host provides both a 15-pin SATA power connector and a compatible 7-pin SATA-style SAS data port. The 50 cm length limits placement to drives mounted close to the motherboard or backplane, so measure the internal routing path before ordering.
Build and daily use
Moulded connectors and shielded wiring support 6 Gb/s serial transfer while preserving the SCSI command set. The unified cable reduces clutter compared to separate power and data leads, and the fixed 50 cm reach suits tight chassis layouts where longer runs would obstruct airflow or panel closure. Buyers needing to connect drives with standard SATA data ports or those requiring longer cable runs should select a different assembly.
How it compares
Measured against everything we stock in SAS, SCSI, InfiniBand & MCIO Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 92% of the 1,224 comparable items (median $26.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the cable include both the 15-pin power and 29-pin SAS connectors, or must the power connector be purchased separately?
The cable has a 15-pin male SATA power connector and a 29-pin SAS SFF-8482 connector built in, so no separate power cable is required.
Should I choose a different length or connector style for my SAS drive?
This model is a 50cm cable with a 7-pin SATA-style SAS connector on the drive end and a 29-pin SAS SFF-8482 connector on the controller end; other lengths or styles are not covered by this listing.
Will the 6Gb/s rating deliver full speed when the cable is installed in my server?
The cable supports a 6Gb/s serial interface, so it will not limit a 6Gb/s SAS drive or controller when connected correctly.
More in SAS, SCSI, InfiniBand & MCIO Cables
Similar items
Monoprice 108778 SATA 6Gbps cable 18 inch locking latch black
- Sata Cable
- SATA
Mellanox Technologies MFA1A00-E001 LinkX InfiniBand cable QSFP+ 3.28 ft
EN-Labs SFF80874SATA1M90 Mini SAS to 4 SATA Cable 1m
- Internal mini SAS
- Black / Blue
EN-Labs SFF86434SATA1M SAS cable 12Gbps 3.3ft SFF-8643 to 4 SATA
- SFF-8643 to SATA
- Black & Blue





