Weiler 1475 Crimped Wire Wheel Brush 6 in 0.012 in Brass

Brass crimped wheel for bench grinders

The Weiler 1475 is a 6 inch brass crimped wire wheel brush built for use on a bench grinder. It suits metalworkers and maintenance staff who need gentle surface cleaning, deburring or polishing on softer metals without removing base material. The 0.012 inch brass filaments provide a lighter brushing action than steel alternatives.

Check grinder arbor and speed rating

Verify that your bench grinder accepts a threaded hole arbor sized from 5/8 inch to 1/2 inch before ordering. Confirm the grinder’s no load speed does not exceed 6,000 RPM, as this is the brush’s maximum safe operating speed. The face width measures 1/2 inch, so ensure adequate clearance between tool rests and guards.

Brass fill resists sparking and contamination

Brass construction means the brush will not rust and reduces the risk of iron contamination on stainless steel, aluminium or copper workpieces. Crimped wire geometry gives a flexible brushing action that conforms to irregular surfaces while maintaining consistent contact. The 1 7/16 inch bristle length allows reach into recesses without excessive pressure.