We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
2.5 inch U.2 enterprise SSD with silver metal casing

Western Digital

Western Digital Ultrastar DC SN200 HUSMR7676BDP3Y1 0TS1357 7.68TB enterprise SSD

SKU CH-N5CA-7JV4G

A 7.68 TB enterprise NVMe SSD with 3350 MiB/s reads, 2100 MiB/s writes and 1 DWPD endurance in a 2.5" U.2 form factor

  • Total capacity7.68 TB
  • Interface typePCI-Express 3.0 x4
  • Form factor2.5 in U.2
  • Sustained sequential read rate3350 MiB/s
  • Sustained sequential write rate2100 MiB/s
  • Write endurance1 DWPD
  • 68TB capacity supports large enterprise datasets
  • 3350 MiB/s sequential read accelerates data-intensive workloads
  • 2100 MiB/s sequential write sustains high-throughput operations
  • 1 DWPD endurance rating ensures consistent daily write performance
  • 2,000,000 hours MTBF delivers long-term reliability for data centres

7.68TB enterprise NVMe for data-centre workloads

The Western Digital Ultrastar DC SN200 provides 7.68TB of MLC storage in a 2.5 U.2 form factor. It connects through a PCI-Express 3.0 x4 interface and is rated for 1 DWPD endurance. The drive targets enterprise servers, storage arrays, cloud deployments and big-data analytics where consistent capacity and reliability are required. It is not suited for desktop builds lacking U.2 backplane support.

Sustained 3350 MiB/s read

Sequential throughput is specified at 3350 MiB/s for reads and 2100 MiB/s for writes during continuous operation rather than brief bursts. Dual-port architecture and flash-aware RAID maintain data-path integrity when the drive serves heavy, concurrent I/O streams. End-to-end data protection and advanced ECC correct errors on the fly without throttling performance. The 1 DWPD rating reflects steady-state write durability over the warranty period.

Dual-port U.2 with hot-swap and power-loss

The 2.5 U.2 connector enables dual-port redundancy and hot-swap replacement inside compatible server chassis. Power-loss protection safeguards in-flight writes during unexpected outages. Secure Erase and end-to-end data-path protection simplify decommissioning and compliance. MTBF is rated at 2,000,000 hours for continuous operation. Systems without U.2 NVMe backplanes cannot use this drive.

How it compares

Measured against everything we stock in Server & Data Center SSDs, at today’s prices. Recalculated every night.

Price $1,592.99
Pricier than about 61% of the 1,039 comparable items (median $992.99).
Total capacity 7.68 TB
Higher than about 80% of the 522 comparable items (median 3.2 TB).
Price per TB $207.42 per TB
Cheaper than about 86% of the 522 comparable items (median $595.64 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameWestern Digital
Product lineUltrastar DC SN200
Model nameHUSMR7676BDP3Y1
Part number0TS1357
Total capacity7.68 TB
Performance
Sustained sequential read rate3350 MiB/s
Sustained sequential write rate2100 MiB/s
Storage
Write endurance1 DWPD
Ports & slots
Interface typePCI-Express 3.0 x4
Size & build
Form factor2.5 in U.2
More details
Mean time between failures2,000,000 h

Questions about this item

How much heat and power does the 7.68TB Ultrastar DC SN200 generate when running continuously in a server?

The drive is rated for 1 DWPD endurance with a 2,000,000 hour MTBF, built with MLC flash and power-loss protection for sustained enterprise workloads.

What connector and slot does the U.2 2.5" form factor need on my motherboard or backplane?

It requires a U.2 NVMe port wired to PCIe 3.0 x4; the dual-port design also supports redundant paths in compatible backplanes.

Will this PCIe 3.0 x4 NVMe drive work in an older server that only has PCIe 2.0 slots?

The drive uses PCIe 3.0 x4 for up to 3350 MiB/s read and 2100 MiB/s write; it will negotiate down to PCIe 2.0 speeds if the slot only supports that generation.

More in Server & Data Center SSDs

Similar items