Western Digital WD60EFPX 6TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 6 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
10 TB CMR drive at 7200 RPM with 512 MB cache, built for 24×7 NAS workloads up to 180 TB per year
The WD Red Plus WD100EFGX is a 10 TB CMR hard drive built for multi-bay NAS enclosures. Its NASware firmware tunes drive behaviour for continuous RAID workloads in small and medium business environments. The 7200 RPM spindle and 512 MB cache deliver sustained throughput for shared storage and backup tasks.
Verify that your NAS chassis accepts 3.5 inch drives up to 26.10 mm high, 101.60 mm wide and 147.00 mm long. A free SATA 6.0 Gb/s port and matching power connector are required. The drive supports up to eight bays per system, so confirm your enclosure bay count before ordering.
The drive is rated for a 180 TB annual workload rate, reflecting 24x7 operation rather than burst transfers. CMR recording avoids the write slowdowns seen with shingled media during long rebuilds or heavy multi-user access. NASware firmware maintains consistent error recovery during extended RAID rebuilds.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | WD |
| Product line | Red Plus |
| Model name | WD100EFGX |
| Total capacity | 10 TB |
| Recommended use | For NAS systems |
| Performance | |
| Rotational speed | 7,200 RPM |
| Storage | |
| Flash memory type | Hard Drive |
| Recording method | CMR |
| Cache memory | 512 MB |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Max height | 26.1 mm |
| Maximum width | 101.6 mm |
| Maximum length | 147 mm |
| Shipping weight | 0.70 kg |
| Package size | 152 × 102 × 25 mm |
Other versions of this model
The drive is supplied as a bare 3.5" SATA unit; SATA data and power cables plus mounting hardware are not included and must be sourced separately.
The 10TB version balances cost per terabyte and raw space for mid-sized NAS arrays while staying within the 8-bay limit and 180 TB/yr workload rating.
The 7200 RPM spindle and 512MB cache sustain the sequential throughput needed for multi-stream RAID workloads in a continuously operating NAS.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?