Westward 23PC37 Medium Duty Plug 2 Gauge 175A Blue
Medium duty plug rated 175A at 12/24V with silver-plated brass contacts for 2 gauge cable
- Product typeAccessories & Compressors
- Product colorBlue
- Handles up to 175 A for high‑current battery connections
- Silver‑plated brass contacts keep voltage drop to 0.001 V DC
- Blue polypropylene housing identifies polarity at a glance
- Fits 2‑gauge cable for secure 12/24 V solar set‑ups
- Compact 3 3/16 in length saves space in tight enclosures
Medium Duty Plug for 12/24V Systems
This Westward 23PC37 plug is built for medium-duty solar and battery connections. It suits installers who need a reliable 2 gauge link for 12 or 24 volt circuits. The silver-plated brass contacts sit inside a blue polypropylene housing. It is not for high-voltage arrays or heavy-gauge cables beyond the rated size.
175 Amp Capacity with Low Voltage Drop
The plug handles up to 175 amps continuous current with a voltage drop of only 0.001 V DC. This headroom covers most medium-duty charge-controller and battery-bank wiring. It runs out when the circuit demands a larger gauge or a higher voltage than 24 volts. The neutral polarity design simplifies installation on either side of the circuit.
Plug-In Connection with Silver-Plated Brass Contacts
The defining specification is the plug-in connection using silver-plated brass terminals. This interface mates with matching 2 gauge connectors for a secure, low-resistance joint. Builders who need bolt-on lugs, screw terminals or a different gauge size must choose a different connector type.
How it compares
Measured against everything we stock in Solar-Powered Chargers & Devices, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 80% of the 874 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Brand name | WESTWARD |
| Product type | Accessories & Compressors |
| Product color | Blue |
Questions about this item
Will the 2 gauge 175A plug fit my existing 12/24V battery cables?
It is rated for 2 gauge wire and 175A maximum current on 12/24V battery systems, so it matches cables built to those specs.
How can I verify the connection is sound once installed?
The specified voltage drop is 0.001 V DC; measure across the mated contacts under load and you should see a drop at or below that figure.
Does the package include the mating connector or only the plug housing?
The listing states it includes the connector, so both halves are supplied; no separate connector purchase is required.
More in Solar-Powered Chargers & Devices
Similar items
Camojojo Trail Camera Mounting Bracket 1/4"-20 Thread 360° Rotating Solar
- Solar Mounting Brac…
crystalsolar 4.5W 12V 380mA Solar Panel Epoxy Monocrystalline
- Solar Panel
- Black





