We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray painted steel enclosure with screw-on cover and captive screws, 12 by 12 by 8 inches

Wiegmann

Wiegmann SC121208NK Enclosure 12x12x8 in 16 ga

SKU CH-3M84-567MA

A wall-mount carbon-steel enclosure with captive screws, 12 in by 12 in by 8 in, 16 ga, NEMA 1, cULus and CSA certified

  • NEMA 1 rated for indoor dust protection
  • 16-gauge carbon steel resists impact and deformation
  • cULus and CSA certified for code-compliant installations
  • Embossed mounting holes speed up wall-mount setup
  • 88 in usable depth fits standard components

Wiegmann SC121208NK Carbon Steel Enclosure

The Wiegmann SC121208NK is a NEMA 1 rated enclosure built from 16 gauge carbon steel with a painted gray finish. It measures 12 inches high, 12 inches wide and 8 inches deep, providing a usable opening depth of 7.88 inches. The solid cover attaches with plated steel screws and the box includes self-tapping screws for installation. Embossed mounting holes support wall mounting.

Indoor electrical housing for standard environments

This enclosure suits installers who need a UL Listed and cULus certified box for indoor electrical controls or junction wiring. The screw-on cover and solid door provide basic protection against contact with live parts. Buyers who require protection from water, dust, oil or corrosive atmospheres should select an enclosure with a higher NEMA rating. Units needing knockouts or conduit entries are not addressed by this model.

16 gauge steel thickness determines rigidity

The 16 gauge carbon steel construction sets the mechanical strength and weight of the enclosure. Thicker gauges resist impact and deflection better but add mass, while thinner gauges reduce cost and weight. Confirm that this gauge meets the structural demands of your mounting surface and the equipment housed inside before purchasing.

How it compares

Measured against everything we stock in Breakers & Circuit Protection, at today’s prices. Recalculated every night.

Price $46.99
Cheaper than about 58% of the 1,135 comparable items (median $54.99).

Specifications

Product
Brand nameWIEGMANN

Questions about this item

How do I mount the SC121208NK enclosure to a wall using the embossed holes, and what screw size should I use?

The enclosure has embossed mounting holes for wall mounting. The included self-tapping screws secure the cover, but wall-mounting hardware is not supplied; choose fasteners suited to your wall material and the hole pattern.

What ongoing maintenance does the painted carbon-steel body and plated-steel cover screws require?

Inspect the gray painted finish periodically for scratches or corrosion, especially in damp areas, and touch up with compatible paint. Check that the plated cover screws remain tight and free of rust; replace any that show damage.

At what point does the usable opening depth limit the equipment I can install inside?

The usable opening depth is 7.88 in, so any device deeper than that will not fit with the solid cover closed. Verify your component depth against this figure before ordering.

More in Breakers & Circuit Protection

Similar items