Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 1200 W for HP DL580 G5 servers, accepting 200–240 V input in a 240×85×35 mm metal chassis
This 1200W unit is built for the HP DL580 G5 server and matches part numbers 438202-001, 440785-001 and 441830-001. It accepts 200V to 240V input at 7.8A and delivers up to 1200W output. The metal case measures 240 by 85 by 35 millimetres. It is also marketed for GPU open-rig mining workloads.
Installation is a direct slide-in swap for the original DL580 G5 power supply, requiring no cable adaptation inside the chassis. The proprietary edge connector aligns with the server backplane, so polarity and pin-out are fixed. The only common issue is forgetting that the unit needs 200V to 240V mains; it will not start on a standard 120V circuit.
Efficiency is rated for sustained 1200W delivery rather than short peaks, so the supply maintains its rated wattage during extended mining or compute sessions. The metal enclosure and internal fan layout move heat away from the main transformer without throttling. Continuous operation at full load is supported within the specified input voltage range.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The unit powers on when the server receives 200V-240V input and the internal fan spins; the server POST screen should show all power rails within spec without error codes.
The package includes 1 power supply only; mounting rails, power cords and any GPU mining breakout cables must be purchased separately.
All three part numbers are listed as compatible with the DPS-1200FB A revision; match the sticker on your original unit to the label on this PSU to be certain.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?