WMtec 240W Server Power Supply for HP 6005 6000 6200 SFF
240 W server PSU fits HP 6000, 6005 and 6200 SFF chassis with 4-pin, 6-pin and flat 4-pin connectors
- 240W output powers HP SFF workstations reliably
- 100 V to 240 V input suits global mains voltages
- Compact 14.5 cm by 9.5 cm by 12.9 cm footprint fits small chassis
- Connectors include one 4-pin, one 6-pin and one flat 4-pin
- Replaces HP part numbers 611481-001, 503375-001, 508151-001 and others
Compatible HP SFF Models
This 240W server power supply replaces units in HP Compaq Z200, 4000, 6000, 6005, 6200, 8000, 8100 and 8200 small form factor chassis. It matches spare part numbers 503375-001, 508151-001, 503376-001, 508152-001, 611482-001, 613763-001, 611481-001 and 613762-001. Builders needing a different form factor or higher wattage cannot use this unit.
Thermals and Power Draw
The supply accepts 100 V to 240 V input and delivers 240W maximum output. Physical size is 14.5 cm by 9.5 cm by 12.9 cm, fitting the original SFF cavity. No fan specifications or noise ratings are provided in the data. Systems requiring more than 240W must choose a different power supply.
Connector Layout
Outputs include one 4-pin, one 6-pin and one flat 4-pin connector. The manufacturer notes the power interface is special and advises comparing the connectors with the original unit before installation. No cables, mounting screws or software are bundled.
How it compares
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
- Price $103.99
- Cheaper than about 67% of the 3,798 comparable items (median $131.99).
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the WMtec 240W PSU in an HP SFF chassis and align the special power interface?
Slide the unit into the SFF bay until the latch clicks, then attach the single 4-pin, single 6-pin and single flat 4-pin connectors to the matching motherboard headers; the flat 4-pin is keyed differently so verify orientation before pressing.
Which component will need replacement first on the WMtec 240W PSU?
The internal cooling fan is the only moving part; expect to replace it after several years of continuous operation when bearing noise appears.
What limit appears first when the WMtec 240W PSU runs at full load for long periods?
The 240 W output ceiling is reached before any thermal throttle; sustained draw above that level will trigger over-current protection and shut the unit down.
More in Server & Hot-Plug PSUs
Similar items
HP 720479-B21 800W Flex Slot Platinum Hot Plug Power Supply
- Consumer Electronics
Athena Power AP-U1ATX30A 300W 1U server power supply
- 300 W
- Single





