Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 750 W server power supply delivering up to 62.5 A on the 12 V rail for H-P DL380 G6 and G7 systems
This 750 watt server power supply matches the HSTNS-PL18 and 511778-001 part numbers used in H-P DL380 G6 and G7 systems. It fits the original chassis without modification and accepts 100 to 240 volt input at 50 to 60 hertz. The unit is new and ready for immediate deployment in compatible racks.
It replaces a failed DPS-750RB A module or any lower-wattage supply that shares the same form factor. The upgrade is worthwhile when the existing unit can no longer deliver the rated 12 volt output or when added drives and cards increase the load beyond the old supply’s limit. Builders needing redundant hot-swap bays beyond the standard two should verify chassis support first.
The supply delivers up to 62.5 amps on the main 12 volt rail and 2.5 amps on the 12 volt standby rail for a combined 750 watt maximum. At 1005 grams it sits in a 240 by 85 by 40 millimetre enclosure designed for sustained airflow in dense server rows. Thermal performance remains consistent during extended operation rather than only in short bursts.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
The supply measures 240 mm long, 85 mm wide and 40 mm high, matching the standard hot-plug bay depth for those servers.
Slide the unit straight into the bay until the latch clicks; forcing it at an angle bends the blind-mate pins.
Replace the fan when bearing noise appears or airflow drops, typically after several years of continuous 62.5 A load operation.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?