Athena Power AP-P4ATX60FE 600W server power supply
- 600 W
- Single
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2900 watt server power supply with 80 Plus Platinum efficiency for Dell Networking C9000 and C9010 systems
This 2900W power supply is built for Dell Networking C9000 and C9010 chassis. It accepts 100-120V or 200-240V AC input at 50/60Hz and 16A. The unit delivers a 55V main output plus a 3.3V auxiliary rail. It is a new replacement part for the D3000E-S0 and DPS-3000FB A models.
At 200-240V input the supply provides up to 2900W with 52.73A on the 55V rail. At 100-120V input the maximum falls to 1450W with 26.36A on the main rail. The 3.3V auxiliary output remains at 1.0A in both ranges. An 80 Plus Platinum rating confirms high efficiency across typical server load profiles.
The single figure that determines suitability is the maximum output power tied to your AC source: 1450W at 100-120V versus 2900W at 200-240V. If the rack circuit cannot supply 200-240V the unit will not reach its rated peak. Buyers needing full 2900W capacity on low-voltage mains cannot use this PSU.
Measured against everything we stock in Server & Hot-Plug PSUs, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
No published specifications for this item yet.
At 200-240V input the unit is rated for 2900W maximum output with 80 Plus Platinum efficiency, meaning at least 80% of input power reaches the load; the remaining energy becomes heat that the internal fan must exhaust.
The supply is built for Dell Networking C9000 and C9010 systems; it slides into the chassis' redundant PSU bay and connects via the proprietary edge connector, so the matching Dell chassis and backplane are required.
Yes, the D3000E-S0 is a direct replacement or additional unit for the C9000 and C9010 platforms, sharing the same 55V main rail and 3.3V auxiliary rail pinout used by those chassis.
More in Server & Hot-Plug PSUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?