We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
12-inch paint roller cover with quarter-inch nap in transparent mohair-polyester blend

Wooster Brush Company

Wooster Brush Company R207-12 12" Paint Roller Cover 1/4" Nap Mohair/Polyester

SKU CH-C6RB-8E4A3

A 12-inch roller cover with a 1/4-inch mohair and polyester nap for smooth finishes on floors and coatings

  • Product colorTransparent
  • 12 in cover fits standard yoke frames
  • 1/4 in nap leaves smooth finish on floors and enamels
  • Mohair polyester blend holds paint evenly
  • Polypropylene core resists solvents and water
  • Includes two end caps for secure fit

Product identity

This 12-inch roller cover suits painters who apply enamels, epoxies, urethanes or floor coatings on smooth surfaces. The mohair and polyester blend lays down a thin, even film without texture marks.

Interface limits

The quarter-inch nap holds less paint than heavier covers, so frequent reloading is needed on large areas. It fits only 1½-inch core frames with a yoke style, ruling out cage or screw-on handles.

Install notes

Slide the cover onto the frame until the two end caps seat firmly; a loose cap lets the cover spin and leaves streaks. Clean immediately with the solvent matched to the coating, because dried epoxy or urethane cannot be removed from the fibers.

How it compares

Measured against everything we stock in Painting Tools & Sprayers, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 60% of the 640 comparable items (median $9.99).

Specifications

Product
Brand nameWOOSTER
Product colorTransparent

Questions about this item

Should I choose the 12" cover or the 18" version for a smooth floor coating job?

The 12" cover suits smaller areas and tighter spaces, while the 18" version covers large floors faster; both share the same 1/4" nap and Mohair/Polyester blend for smooth finishes.

What does the 1/4" nap actually deliver when rolling epoxy or urethane on a concrete floor?

The short 1/4" nap lays down a thin, even film with minimal texture, reducing stipple and helping self-levelling coatings flow out smoothly on smooth substrates.

The core is 1 1/2" polypropylene — will it fit my standard yoke frame and what does that limit?

The 1 1/2" core slides onto any standard yoke frame such as the BR036-18 or BR047-18; the fixed core diameter means you cannot use cage frames designed for larger cores.

More in Painting Tools & Sprayers

Similar items