We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with 6-pin female and detachable 8-pin male connectors, 33 cm long

WRIARICH

WRIARICH 6 Pin to 8 Pin CPU Power Adapter 13-inch 33cm 18AWG Model 373901

SKU CH-PZ6R-19BJ3

Converts a PSU 6-pin output to an EPS 8-pin or 4-pin CPU connector, 33 cm 18 AWG cable for dual or quad CPU boards

  • Converts 6-pin PSU output to EPS-12V 8-pin for server boards
  • Detachable 4+4 design also fits P4 ATX 4-pin motherboard headers
  • 13-inch 18AWG cable keeps routing tidy inside the case
  • Self-adhesive tape included for secure cable management
  • Strictly for CPU power — not compatible with graphics cards

6 Pin to 8 Pin CPU Power Adapter

The WRIARICH adapter converts a power supply 6 pin output into an EPS-12V 8 pin (4+4 detachable) or P4 ATX 4 pin motherboard connector. It suits builders using dual, quad or server boards that require an 8 pin CPU power input but only have a 6 pin lead available. The 13 inch (33 cm) sleeved cable includes self-adhesive tape for routing. It is designed solely for motherboard use.

Capacity and headroom

The 18 AWG tin-coated copper wire (type 1007) carries the current needed for typical multi-CPU server boards within the length provided. The detachable 4+4 pin end lets you fit either an 8 pin EPS socket or a 4 pin P4 socket by sliding the extra section on or off. Headroom ends where the power supply 6 pin rail cannot deliver the wattage the motherboard demands, or where the cable length falls short of the routing path.

Practical limits of the EPS-12V interface

The EPS-12V 8 pin (4+4) standard expects a dedicated CPU power rail from the supply; this adapter only reshapes the existing 6 pin connector, it does not create extra power. Using the cable with a graphics card will damage the adapter and the card because the pin-out and current spec differ. The 13 inch reach limits placement to motherboards close to the power supply; longer runs need a different cable.

How it compares

Measured against everything we stock in Jumper & Adapter Power Cords, at today’s prices. Recalculated every night.

Price $14.99
Pricier than about 55% of the 402 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Model name373901

Questions about this item

Will this 6-pin to 8-pin EPS adapter work with my existing ATX power supply that only has 6-pin PCIe connectors?

Yes, the 6-pin female end plugs into a 6-pin port on the power supply, while the detachable 8-pin (4+4) male end connects to the motherboard EPS or 4-pin ATX socket.

How can I verify the 18AWG cable is delivering stable power after installation?

The system should boot reliably under load; check BIOS hardware monitoring for steady 12 V rails and confirm no unexpected shutdowns during stress tests.

Does the package include only the 33 cm sleeved adapter and the self-adhesive tape, or are extra cables required?

The box contains one 13-inch 6-pin to 8-pin (4+4) adapter and one piece of self-adhesive tape; no additional cables are included.

More in Jumper & Adapter Power Cords

Similar items