Nippon Labs 50DP14V-MM-6 DisplayPort cable 6 ft 8K 60Hz HBR3 32.4 Gbps
- 6 ft (1.83 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 3.3 ft DisplayPort 2.1 cable delivering 80 Gbps bandwidth for 4K at 240 Hz, 8K at 120 Hz and 16K at 60 Hz with DSC, triple-shielded solid copper construction and VESA certification
This DisplayPort 2.1 cable carries up to 80 Gbps of bandwidth between a graphics card and a monitor. It supports 4K at 240 Hz, 8K at 120 Hz and 16K at 60 Hz with Display Stream Compression. The link is aimed at gamers and creators who need high refresh rates at very high resolutions.
The 3.3 ft male-to-male cable uses solid copper conductors and triple shielding to reduce signal loss. Both ends are standard DisplayPort 2.1 plugs that lock into DP, DP++ or DisplayPort++ ports on monitors from Samsung, Dell, LG, HP, ASUS, Acer and iiyama as well as on graphics cards such as GTX 980 and GTX 1080.
The 80 Gbps UHBR20 rating is the single figure that determines whether this cable can drive your target resolution and refresh rate without compression artefacts. If your display and GPU both support UHBR20 the link will run at full speed; if either side tops out at UHBR13.5 or UHBR10 the cable will still work but at the lower rate.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ESTONE |
| Model name | A0108 |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 Hz/120 Hz/144 Hz Support |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 3.3 ft (1.01 m) |
| Cable length | 3.3 ft (1.01 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
The cable provides 80 Gbps bandwidth and supports up to 16K at 60 Hz with DSC, 8K at 120 Hz, and 4K at 240 Hz.
The cable is 3.3 ft long with male-to-male DisplayPort 2.1 connectors; the package measures 8.19 x 3.7 x 0.63 inches.
Plug each male DisplayPort connector firmly into the source and display until the latch clicks; the common mistake is not seating the latch fully, which can cause signal dropouts.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?