TRENDnet TK-207K 2-Port USB KVM Switch
- 1 x USB (Type A), 1…
- 2 x USB Keyboard/Mo…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Lets two computers share two monitors and four USB 3.0 devices at up to 4K 60 Hz with push-button or wired-remote switching
The WRIARICH SW220 lets two computers share two HDMI monitors and four USB 3.0 peripherals. It is aimed at users who need a single keyboard, mouse and display pair across a workstation and a laptop or a pair of desktops. Each computer must provide two HDMI outputs and support dual-display operation. The switch handles signal routing only and does not process or alter the video data.
The unit ships with a 12 V DC adapter and runs without fan noise or measurable heat in normal use. Power draw is limited to the adapter and the connected USB devices. Switching between computers is performed by front-panel push buttons or the supplied wired remote; no hot-key sequence is supported. LED indicators show the active port at a glance.
Maximum supported resolution is 4K at 60 Hz, provided every cable, GPU and monitor in the chain also supports that mode. Lower resolutions work automatically. The switch cannot mix sources — both monitors always show the same computer. If flicker occurs, shorter HDMI cables are recommended rather than adapters.
Measured against everything we stock in KVM Switches & Rack Consoles, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Model name | SW220 Dual Monitor KVM |
| Product type | HDMI, USB |
| Display | |
| Supported video resolution | Our KVM switch supports up to 4K@60 Hz, provided that the cables, computers and monitors you use all support 4K@60 Hz. |
| Graphics | |
| Monitor support | HDMI, HDMI |
| Ports & slots | |
| Computer ports | 2 Port HDMI - Dual Monitor |
| Monitor ports | 2 Ports |
| USB support | With USB support |
| Power | |
| Power requirements | Come with DC Power Adapter |
| Size & build | |
| Product dimensions | 20.3 × 14.6 × 5.7 cm |
| Product weight | 540 g |
| In the box | |
| In the box | 1 x DUal Monitor KVM Switch, 2 x USB 3.0 Cable, 1 x Wired Remote, 1 x Power Adapter, 1 x User Manual |
| More details | |
| Switching method | Push Buttons and Wired Remote |
| Status lights | Yes |
Connect each computer with two HDMI cables and one USB 3.0 cable to the KVM, then attach both monitors and the 12 V power adapter; the step often missed is plugging in the DC power before switching inputs.
No scheduled maintenance is required; if a USB 3.0 cable or the wired remote fails, replace it with a compatible cable or remote of the same specification.
The HDMI link is rated for 4K at 60 Hz, so signal integrity over long cables becomes the limiting factor; use shorter HDMI cables if flicker occurs.
More in KVM Switches & Rack Consoles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?