WRIARICH USB4 40Gbps 100W 1.6ft Thunderbolt 3/4 cable

USB4 Gen 3×2 cable for Thunderbolt 3/4

This 1.6 ft USB-C to USB-C cable runs at the USB4 Gen 3×2 standard and is fully compatible with Thunderbolt 3 and Thunderbolt 4 hosts and devices. It also works with older USB-C 3.2, 3.1 and 2.0 equipment at their native speeds. The male-to-male connectors are bi-directional and reversible for simple plug-in.

Check host port capabilities before ordering

Your USB-C port must support DisplayPort Alternate Mode to drive an external display through this cable. For 100 W charging both the power source and the device need to negotiate PD 3.1, PD 3.0 PPS or an equivalent fast-charge protocol. Data throughput will fall back to the lowest common standard if either end uses an older USB-C controller.

Sustained 40 Gbps throughput with 100 W delivery

The cable maintains the full 40 Gbps signalling rate during extended transfers to high-speed storage or eGPU enclosures without thermal throttling. It simultaneously delivers up to 100 W (20 V/5 A) for charging laptops or powering docks while the data link remains active. The nylon-braided jacket resists wear during daily connect-disconnect cycles.