We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black full-motion TV wall mount with dual articulating arms, flat against wall

XINLEI MA570 Full Motion TV Mount 26-70" 100lbs VESA 400x400mm 12/16" Studs

SKU CH-7F19-ME482

Full-motion wall bracket holds 26–70 in TVs up to 100 lbs, VESA 400×400 mm, fits 12/16 in studs

  • Product nameFor 26-70 in
  • Mounting typeWall Mount
  • Supported TV sizeFor 26-70 in
  • Product colorBlack
  • Product weight3.919 kg
  • Fits 26 to 70 inch screens up to 100lbs with VESA 75x75 to 400x400
  • Tilts +5°/-10° and swivels ±60° for glare reduction and wide viewing angles
  • Extends 2 to 15.7 inches from wall with ±3° level adjustment for flexibility
  • Six-arm cold-formed steel frame strength tested for secure heavy-duty mounting
  • Includes hardware, bubble level and cable ties for installation on 12 or 16 inch studs

Universal TV Wall Mount 26–70 Inches

The XINLEI MA570 full-motion bracket fits most flat or curved screens from 26 to 70 inches weighing up to 100 lbs. It supports VESA patterns from 75×75 mm to 400×400 mm and mounts to wood studs spaced 12 or 16 inches on centre. The cold-formed steel frame uses a six-arm design that has been strength-tested for secure installation.

Tilt Swivel Level and Extension Range

The mount tilts five degrees up and ten degrees down to reduce glare, swivels sixty degrees left or right for wide viewing angles, and levels plus or minus three degrees for fine alignment. It extends from two inches to 15.7 inches from the wall, allowing flexible positioning without exceeding the stated load limit.

Hardware Bubble Level Cable Ties and Instructions

The package includes all mounting hardware, a bubble level, and printed instructions so the bracket can be fitted in about fifteen minutes. Three cable ties are supplied for basic cable management. The manual explicitly warns against mounting on drywall alone, so installers must anchor into studs.

How it compares

Measured against everything we stock in TV Wall Mounts & Install Kits, at today’s prices. Recalculated every night.

Price $32.99
Cheaper than about 69% of the 1,540 comparable items (median $47.99).

Specifications

Product
Brand nameXINLEI
Model nameMA570
Product nameFor 26-70 in
Product colorBlack
Size & build
Mounting typeWall Mount
Product weight3.919 kg
Compatibility
Supported TV sizeFor 26-70 in

Questions about this item

How do I mount the MA570 on 16-inch wood studs and what step causes most problems?

Mark the centre of two 16-inch on-centre studs, drill pilot holes, and bolt the wall plate using the supplied lag bolts; the step people miss is verifying each bolt bites into solid wood — not just drywall — before hanging the TV.

What maintenance will the articulating arms and tilt mechanism need over time?

Every six months check that the six-arm pivot bolts and the tilt-swivel tension screws remain snug; re-tighten with a hex key if any play appears, and wipe dust from the sliding rails so movement stays smooth.

At what extension does the mount reach its structural limit under a 100 lb load?

The dual arms extend to 15.7 inches from the wall; at that maximum reach the 100 lb rating is at its limit, so do not add extra leverage or heavier displays beyond the stated capacity.

More in TV Wall Mounts & Install Kits

Similar items