We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided SATA 22-pin to IDE 4-pin and SATA 7-pin cables, 50cm each

XMSJSIY Round SATA 22 pin IDE 4 pin to SATA 15P 7 pin 2-in-1 cable 50cm 2 pack

SKU CH-G06B-V9XNE

A 2-in-1 cable converts an IDE 4-pin connector to SATA 15-pin power and 7-pin data for drives, delivering 6 Gbps transfer in a 50 cm braided length

  • Refresh frequency6000000000 Hz
  • Rated speed6 Gbit/s
  • Connector countSata / Male-to-Female
  • Connector details1 x eSATA to 1 x eSATA
  • Connector genderMale to Female
  • Build detailsBraided, PVC
  • 2-in-1 cable delivers power and 6 Gbps data through one 22-pin connector
  • 50 cm length with braided sleeve fits tight cases and keeps airflow tidy
  • Backward compatible with SATA I and II drives for easy upgrades
  • Hot-plug support lets you swap drives without rebooting or installing drivers
  • Pack includes two cables for multiple device connections

What this cable does

This 22-pin SATA power-and-data cable combines a 15-pin power connector and a 7-pin data connector into a single braided assembly. It connects motherboards or host controllers to hard drives, SSDs, optical drives or PCI-E cards. The pack contains two 50 cm cables rated for 6 Gbps SATA III speeds.

Check your drive and board connectors

Verify that the target device accepts a standard 15-pin SATA power plug and a 7-pin SATA data port. The cable also provides a 4-pin IDE power connector for older power supplies. Ensure your motherboard has a free SATA data header and that the power supply can deliver 3.3 V, 5 V and 12 V on the appropriate pins.

Build integration and clearance

The 50 cm length and flat, braided sheath allow tidy routing in compact cases. The 2-in-1 design eliminates the need for separate power and data cables, reducing clutter around drive bays. Backward compatibility with SATA I and II lets the cable work with legacy drives while supporting hot-plug operation without driver installation.

How it compares

Measured against everything we stock in IDE/PATA Ribbon Cables, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 70% of the 63 comparable items (median $24.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameXMSJSIY
Model nameXMSJSIY Round
Product typeSATA
Product colorBlack
Performance
Rated speed6 Gbit/s
Display
Refresh frequency6000000000 Hz
Ports & slots
Connector countSata / Male-to-Female
Connector details1 x eSATA to 1 x eSATA
Connector genderMale to Female
Size & build
Overall length< 1 in
Build detailsBraided, PVC

Questions about this item

What comes in the box and do I need a separate SATA data cable?

The pack includes two 50 cm 2-in-1 cables. Each cable carries both 15-pin power and 7-pin data, so no extra SATA data cable is required.

How do I choose between the 22-pin and 15-pin connectors on the drive end?

Use the 22-pin (15+7) plug for drives that combine power and data in one port; use the 15-pin power plus separate 7-pin data plugs when the drive has distinct connectors.

What does the 6 Gbps rating mean once the cable is installed?

The cable supports SATA III 6 Gbps throughput, backward compatible with SATA I and II; actual speed is limited by the connected drive and controller.

More in IDE/PATA Ribbon Cables

Similar items