We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six titanium-coated HSS drill-taps with 6.35 mm hex shanks in a set

Xnrtop 6 Pcs HSS Drill Tap Set M3-M10 6.35mm Hex Titanium

SKU CH-GN6X-7HTH3

Six HSS 4341 titanium-coated drill taps cover metric M3–M10 threads with 0.5–1.5 mm pitch and a 6.35 mm hex shank for machine use

  • Main colorTitanium
  • Chuck typeHex
  • Chuck size0.25 in inches
  • Core bit cap concreteAlloy Steel, High Speed Steel (HSS)
  • Fastener rangeM3 to M10
  • Head styleHex
  • Drill and tap in one pass saves time
  • Titanium-coated HSS 4341 steel extends tool life
  • 35 mm hex shank fits quick-change chucks
  • Metric sizes M3 to M10 cover common threads
  • Spiral flutes clear chips for cleaner holes

6-piece M3-M10 HSS drill-tap set

This set combines drilling and tapping in a single pass for metric threads from M3 to M10. Six titanium-coated high-speed steel bits cover pitches of .5, .7, .8, 1.0, 1.25 and 1.5 mm. Each bit is marked for quick size identification. The tools are intended for machine use where repeatable accuracy matters.

¼-inch hex shank for quick-change chucks

The 6.35 mm hex shank fits standard quick-change holders on drill presses, lathes or CNC machines. A tapered lead prevents the bit from walking and reduces the chance of over-drilling. Back taper on each tap clears chips ahead of the cutting edges, protecting newly formed threads. No separate drill bit or tap handle is required.

HSS 4341 substrate with titanium coating

The alloy steel core retains hardness during extended cutting cycles while the titanium surface reduces friction and wear. Spiral flutes evacuate chips continuously, maintaining cutting efficiency in deeper holes. Machine-driven operation eliminates the variation of hand tapping, so thread quality stays consistent across repeated operations.

How it compares

Measured against everything we stock in Power Drills, Drivers & Cutting Bits, at today’s prices. Recalculated every night.

Price $13.99
Cheaper than about 90% of the 2,412 comparable items (median $81.99).

Specifications

Product
Brand nameXnrtop
Model namejs-drill
Part numbernr-js6
Color and finishTitanium
Main colorTitanium
Processor
Core bit cap concreteAlloy Steel, High Speed Steel (HSS)
Power
Corded or cordlessNo
Size & build
Main materialSteel
Chuck size0.25 in inches
In the box
Number of items12 pack
More details
Chuck typeHex
Fastener rangeM3 to M10
Head styleHex
Nail diameterM3 to M10

Questions about this item

What is the largest thread size the M10 tap can cut before the bit wears out?

The set cuts metric threads from M3 to M10 with pitches of .5, .7, .8, 1.0, 1.25 and 1.5 mm using HSS 4341 steel with a titanium coating for extended life.

How hot do the bits get when tapping steel all day on a machine?

The titanium-coated HSS 4341 bits are designed for machine use where spiral flutes improve chip clearing, reducing heat build-up during continuous operation.

What drive tool is needed for the 6.35 mm hex shank?

A 1/4-inch (6.35 mm) quick-change hex chuck or impact driver accepts the tapered shank directly for machine tapping.

More in Power Drills, Drivers & Cutting Bits

Similar items